EN1092-1 PN10 Alloy Steel Flanges

EN1092-1 PN10 Alloy Steel Flanges

EN1092-1 PN10 Alloy Steel Flanges

EN1092-1 PN10 Alloy Steel Flanges introduction

EN1092-1 PN10 Alloy Steel Flanges are indicated with 8 types here: slip-on plate flange, loose plate flange with weld-on plate collar, loose plate flange with stub ends, loose plate flange with weld-neck collar, blind/blank flange, weld-neck flange, hubbed slip-on flange, integral flange. These EN1092-1 PN10 Alloy Steel Flanges are under nominal pressure of 1.0Mpa, according to European Standard(EN1092-1 PN10).

EN1092-1 PN10 Alloy Steel Flanges specification

Type Alloy steel flanges: slip-on plate flange, loose plate flange with weld-on plate collar, loose plate flange with stub ends, loose plate flange with weld-neck collar, blind/blank flange, weld-neck flange, hubbed slip-on flange, integral flange.
Standard EN1092-1
Nominal diameter DN10-3000
Nominal pressure PN10; 1.0Mpa
Steel processing Smelted
Certificate ABS, CCS, DNV, GL, BV, LR, KR, etc.
Application Petroleum, chemical, food industry, marine, automobile industry, rail building, general engineering, etc.


EN1092-1 PN10 Alloy Steel Flanges dimensions (refer to the catalogue for more)
EN1092-1-PN10-Alloy-Steel-Flanges-dimensions.jpg

EN1092-1 PN10 Alloy Steel Flanges show
EN1092-1-PN10-Alloy-Steel-Flanges-show.jpg

EN1092-1 PN10 Alloy Steel Flanges processing
EN1092-1-PN10-Alloy-Steel-Flanges-processing.jpg

EN1092-1 PN10 Alloy Steel Flanges workshop
EN1092-1-PN10-Alloy-Steel-Flanges-workshop.jpg

EN1092-1 PN10 Alloy Steel Flanges business

We welcome win-win business all over the world. Feel free to contact us for EN1092-1 PN10 Alloy Steel Flanges. Send us enquiries or drawings for special designs. All informations will attract our high attention.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification