Epoxy Antiabrasive Innoxious Hold Paint

Epoxy Antiabrasive Innoxious Hold Paint

Epoxy Antiabrasive Innoxious Hold Paint( use for boats, bottom and surface can use the same one)


Characteristics:long coating interval and excellent abrasion resistance, innoxious、resistance of water and brine, film tenacious and firm、good compatibility with several paints.
Uses:mainly use for steel which after handle it by abrasive blasting and hold anticorrosion of bulk cargo carrier.


Technical target:
Mixing ratio: Host crystal/Firming agent=8/1(by weight)
Standard film thickness: Dry: 100μm/coat
Academic spreading rate: 0.22kg/ m2/100μm
Solid contents: 77%
Humidity requirement: below 85%


Drying time & Coating interval

Temperature℃

-10

0

10

20

Dry to touch (hrs)

2

1.5

1.2

1

Dry semi-hard (hrs)

24

16

11

9

Min. interval (hrs)

24

16

11

9

Substrate treatment:Remove rust、oxide skin by abrasive blasting, reached ISO Sa2.5 grade or remove rust by hand electrically, reached St3 grade
Matching:
Applicable under coatings: Unpainted steel

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification