IEEE 1580 type P 1kv Power Cable,IEEE 1580 type P 1kv Power Cable manufacturer. - Hi-Sea Group 
IEEE 1580 type P 1kv  Power Cable

IEEE 1580 type P 1kv Power Cable

IEEE 1580 type P 1kv Power Cable

IEEE 1580 type P 1kv Power Cable application

IEEE 1580 type P 1kv Power Cable is suitable for use in commercial marine applications, MODU's & Platforms, onshore and offshore drilling platforms, FPSO, etc.

Type P Cables are specifically designed for installation and use in harsh environments found within offshore and onshore drilling rigs. These extreme environments may include severe cold, high heat, constant vibration, drilling mud, mechanical stress, and salt corrosion.

Power circuit up to 2kV, Lighting circuits, Trace heating circuits- Fixed installation power & lighting in both explosion risk and safe areas, general purposes, emergency & critical systems- Designed and constructed for demanding environments and petroleumfacilities located throughout the world

IEEE1580 type P 1kv Power Cable model

0.6/1kV SPN(Switchboard Wire)
0.6/1kV SPN(Power Distribution Cable)
0.6/1kV DPN, 0.6/1kV DPNBS
0.6/1kV TPN, 0.6/1kV TPNBS
0.6/1kV FPN, 0.6/1kV FPNBS
0.6/1kV QPN, 0.6/1kV QPNBS

IEEE 1580 type P 1kv Power Cable construction

1. CONDUCTOR : TINNED ANNEALED ROPE-LAY STRANDED COPPER
2. SEPARATOR TAPE(if necessary)
3. INSULATION(TYPE P ACCORDING TO IEEE 1580)
4. FILLER
5. BINDER TAPE
6. JACKET : ARCTIC NEOPRENE
7. ARMOR : BRONZE WIRE BRAID
*Suitable tape may be applied over / under braid armor
8. JACKET : ARCTIC NEOPRENE

IEEE 1580 type P 1kv Power Cable construction.jpg

IEEE 1580 type P 1kv Power Cable standrads

IEEE 1580(2001)
IEEE 45(2002)
UL 1309 / CSA C 22.2 No.245(1995)
100℃ (IEEE 1580 TYPE P)
110℃ UL1309/CSA C22.2 No. 245 Type X 110
FLEXEN 125 (UL 758 125)

IEEE 1580 type P 1kv Power Cable features

• High strand count conductors make this product extremely flexible, easier to install and more resistant to vibration than Type MC, IEC spec or commercial cables.
• Lower dielectric constant and higher insulation resistance reduces electrical losses.
• Excellent resistance to moisture produces stable electrical properties throughout the life of the cable.
• In fire conditions, non chlorinated flame retardant system produces less toxic and less corrosive gasses.
• Dual certified IEEE 1580 Type P and UL 1309/CSA C22.2 No. 245 Type X110.
• Highest ampacity ratings: ABS 100°C, DNV 95°C, LRS 95°C, Transport Canada 95°C
• Severe cold durability: exceeds CSA cold bend/cold impact (-40/-35° C)
• Flame retardant: IEC 60332-3 Category A and IEEE 1202

IEEE 1580 type P 1kv Power Cable specification

Flame retardant Cold resistant Drilling Mud Resistant (Water&oil based Mud) Crush&Impact resistant Type
IEC 60332-3-22 CAT.A / IEEE 1202 CSA C 22.2 No.38 (cold bend @ -40 and cold impact @ -35 ) NEK 606(2004) UL 1277 & UL 2225 LSX, LSE, TOP, & L(Low Smoke Halogen Free)

IEEE 1580 type P 1kv Power Cable show

IEEE 1580 type P 1kv Power Cable sample4.jpg

IEEE 1580 type P 1kv Power Cable sample

IEEE1580 type P 1kv Power Cable workshop.jpg

IEEE 1580 type P 1kv Power Cable workshop

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification