DIN alloy steel loose flanges

DIN alloy steel loose flanges

DIN alloy steel loose flanges

DIN alloy steel loose flanges introduction

DIN alloy steel loose flanges are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. They are free to swivel around the pipe facilitates the lining up of opposing flange bolt holes.

DIN alloy steel loose flanges specification

Type Alloy steel flange: loose flange
Standard DIN 2652(PN6, DN10-500); DIN 2653(PN10, DN10-500); DIN 2655(PN25, DN10-500); DIN 2656(PN40, DN10-400); DIN 2673(PN10, DN10-250)
Steel processing Smelted
Certificate ABS, CCS, DNV, GL, BV, LR, KR, etc.
Application Petroleum, chemical, food industry, marine, automobile industry, rail building, general engineering, etc.


DIN alloy steel loose flanges construction (refer to the catalogue for dimensions)
DIN-alloy-steel-loose-flanges-construction.jpg

DIN alloy steel loose flanges show
DIN-alloy-steel-loose-flanges-show.jpg

DIN alloy steel loose flanges processing
DIN-alloy-steel-loose-flanges-processing.jpg

DIN alloy steel loose flanges workshop
DIN-alloy-steel-loose-flanges-workshop.jpg

DIN alloy steel loose flanges business

We welcome win-win business for DIN alloy steel loose flanges. Feel free to contact us via phone or email, send us enquiries or drawings for special designs. All informations will attract our high attention.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification