U Shape Cold Formed Steel Sheet Piling

U Shape Cold Formed Steel Sheet Piling:

Introduction:

Steel sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc.

U Sheet Pile

All of our u shape steel sheet pile according to ASTM A 328, ASTM A 690 standards

with continuous form of the web and the location of the interlock symmetrically on each side of the eneutral axis. It has great improvement on the section modulus. Following are the main advantages:

1. Large width, good installation performance

2. Extremely competative of section-modulus to mass ratio

3. Increased inertia for reduced deflection

4. Good corrosion resistance

steel sheet pile drawing

Steel sheet pile:

steel sheet pile.jpg

Quick Details

Standard:	AISI,BS,DIN,GB	Grade:	: Q235B Q345B	Thickness:	6-16mm
Place of Origin:	ChongQing China (Mainland)	Brand Name:	HISEA	Model Number:	HS steel 55
Type:	Steel sheet pile	Technique:	cold rolled
Width:	400mm	Length:	6000mm	service:	best service

Packaging & Delivery

Packaging Detail:	Standard export seaworthy packing
Delivery Detail:	7-20 working days

Specifications

Cold Rolled Steel Sheet Pile(China):
Certi: ISO
Payment:T/T L/C
MOQ:15 Tons
Standard: AISI, ASTM BS, DIN, GB

Specifications:

Top quality steel sheet pile

1.Material, Q235,A295,Q345,
2.Thickness:6-16mm
3.Standard:EN 10249

1. Thickness:6-16mm

2.Any length available by customers requirement

3. Standard:EN 10249

4.High sectional modulus, Biggest modulus of section over 6000

5.Higher quality coefficient with optimized section design, this reduced project cost, 10-15% materials can saved compared hot rolled sheet pile under same performance

Type	Width	Height	Thickness	Sectional area	Weight per pile	Weight per wall	Moment of Inertia	Modulus of section
	mm	mm	mm	Cm2/m	Kg/m	Kg/ m2	Cm4/m	Cm3/m
U7	750	320	5	71.3	42.0	56.0	10725	670
U8	750	320	6	86.7	51.0	68.1	13169	823
U9	750	320	7	101.4	59.7	79.6	15251	953
U10-450	450	360	8	148.6	52.5	116.7	18268	1015
U11-450	450	360	9	165.9	58.6	130.2	20375	1132
U12-450	450	360	10	182.9	64.7	143.8	22444	1247
U11-575	575	360	8	133.8	60.4	105.1	19685	1094
U12-575	575	360	9	149.5	67.5	117.4	21973	1221
U13-575	575	360	10	165.0	74.5	129.5	24224	1346
U11-600	600	360	8	131.4	61.9	103.2	19897	1105
U12-600	600	360	9	147.3	69.5	115.8	22213	1234
U13-600	600	360	10	162.4	76.5	127.5	24491	1361

Optional Steel Grades:

Model	Mechanical Feature
Model	Yield(Mpa)	Tensile(Mpa)	Elongation(%)	Impact Energy
Q235B	235	375-460	38	27
Q345B	≥345	470-630	≥21	≥34
Q345C	≥345	470-630	≥21	≥34
MDB350	≥350	470-630	≥21	≥60
MDB380	≥380	480-640	≥21	≥60
Foreign Model
S355J0	≥355	470-630	≥22	≥27
St52-3	≥355	490-630	≥22	≥27
SM490A	≥325	490-610	≥20
SM490B	≥325	490-610	≥20	≥27
SS490	≥285	490-610	≥19