TXXI(c) flame retardant instrumentation cable,TXXI(c) flame retardant instrumentation cable manufacturer. - Hi-Sea Group 
TXXI(c) flame retardant instrumentation cable

TXXI(c) flame retardant instrumentation cable

TXXI(c) flame retardant instrumentation cable

TXXI(c) flame retardant instrumentation cable application

Unarmored shielded cable for fixed installation in ships where cable protection is not required. Suitable for use on instrumentation and communication systems. Can be installed and operated both indoors and outdoors.

This cable is designed for telephone & instrument circuits up to 150/250V.Suitable for use in commercial marine applications

TXXI(c) flame retardant instrumentation cable standards

- Design guide : IEC 60092-350 & IEC 60092-376
- Insulation material : IEC 60092-351, XLPE
- Sheath material : IEC 60092-359, SHF1
- Flame retardant : IEC 60332-1 & IEC 60332-3 Category A
- Halogen content : IEC 60754-1, 0.5%
- Smoke emission : IEC 61034, 60%
- Cold bend/impact : CSA 22.2 No. 0.3 (-40° / -35° )

TXXI(c) flame retardant instrumentation cable construction

Classification Code Construction detail
Conductor
Stranded plain annealed copper wires as per IEC 60228, Class 2
Insulation T XLPE as per IEC 60092-351
Twisting
Two/Three Insulated cores shall be twisted together to form a pair/triad
Cabling
- Twisted pairs/triads shall be cabled

- Flame retardant & non-hygroscopic fillers may be used

- Suitable tape(s) may be applied on the cabled core

- A Filler may be applied to obtain a circular Cable
Collective screen (c) - Screened by AL/PS tape with tinned copper drain wire
- A suitable tape may be applied on the collective screen
- In case of 250V TIcable, collective screen is omitted
Inner covering X None
Armor X None
Sheath I - SHF1 as per IEC 60092-359
- Sheath color : Black
Core identification
- Colored insulation plus Arabic number printing on the insulation
Pair : White, Black Triad : White, Red, Black

Note:
The other color of sheath and insulation may be applicable when purchaser required.
Stranded tinned annealed copper wire as per IEC 60228, Class 2 may be applicable when purchaser required.

TXXI(c) flame retardant instrumentation cable Electrical parameters

Type Capacitance approx. (nF/km) Inductance, approx, (mH/km) Resistance at 20°C, max. (Ohm/km)
Unshielded pair 0,5 mm² 70 0.60 40.4
Unshielded triple 0,5 mm² 70 0.60 40.4
Unshielded pair 0,75 mm² 65 0.60
26.0
Unshielded triple 0,75 mm² 65 0.60
26.0

TXXI(c) flame retardant instrumentation cable Installation recommendations

Minimum Bending Radius during Installation Minimum Bending Radius Fixed Installed Maximum Tensile Load During Installation Minimum Installation Temperature
8 x D 6 x D 50 N /mm² -10°C

TXXI(c) flame retardant instrumentation cable show

produce equipment 2.jpg

Workshop

produce equipment.jpg

Produce Equipment

marin&offshore cable.jpg

Cable Sample

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification