Wind power cable,Wind power cable manufacturer. - Hi-Sea Group 
Wind power cable

Wind power cable

Wind power cable

Wind power cable application

This product is suitable for onshore and offshore wind farms in the wind power generation system,fixed installation and wind farm underground distribution system,or other similar occasions to transmission energy and signal between the various electrical equipment.This Product has features like flame retardant,soft,abrasion resistant,anti distortion, weather resistance and excellent electrical properties.

Wind power cable Service Condition

1.Ambient temperature -45 ℃ ~ +110 ℃,operating temperature -40 ℃ ~ +110 ℃,normal cable operating temperature 0 ℃ ~ 70 ℃

2.Laying temperature not lower than -30 ℃, ordinary cable laying temperature is not lower than 0 ℃;

3.The cable bend radius: Fixed installation of not less than four times the cable diameter,Mobile installation not less than five times the cable diameter.Ordinary cable bend radius is 20 times of the cable diameter.

Wind power cable Model

Model

Rated Voltage

Name

FDEF-25(-40)

450/750V

Copper Core EPR insulated chloroprene rubber sheath wind power generation cold resistant twisted-resistant flexible cables、

FDES-25(-40)

450/750V

copper core EPR insulated thermoplastic elastomer sheathed wind power generation cold resistant twisted-resistant flexible cables

FDGG-40(-55)

0.6/1kV

1.8/3kV

Copper core SIR insulated SIR sheathed wind power generation extreme cold resistant twisted-resistant flexible cable

FDGU-40(-55)

0.6/1 kV

1.8/3kV

Copper core SIR insulated TPU sheathed wind power generation extreme cold resistant twisted-resistant flexible cable

FDEU-40(-55)

0.6/1kV

1.8/3kV

Copper core EPR insulated TPU sheathed wind power generation extreme cold resistant twisted-resistant flexible cable

FDEG-40(-55)

0.6/1kV

1.8/3kV

Copper core EPR insulated SIR sheathed wind power generation extreme cold resistant twisted-resistant flexible cable

FDEH-25(-40)

0.6/1 kV

1.8/3kV

Copper core EPR insulated CSP sheathed wind power generation cold resistant twisted-resistant flexible cable

FDES-25(-40)

0.6/1kV

1.8/3kV

Copper core EPR insulated TPE sheathed wind power generation cold resistant twisted-resistant flexible cable

Note:(*) If CSM rubber sheathed cable,chloroprene rubber sheath and TPE sheathed cable passed all low temperature -40 ℃ test,the lowest operation temperature of them should be -40 ℃, the corresponding model FDEH- 40, FDEF-40, FDES-40.

(**) For flame retardant model,add ZC as prefix

Wind power cable specification

Model Rated Voltage Core Nominal Cross-section(mm2)
FDEF

FDES

FDGG

FDGU

FDEU

FDEG

FDEH

FDES

450/750V

0.6/1 kV

1 1.5~400
2 1~25
3 1~300
3+1 4~185
4 1~300
5 1~25
6~36 1.5~4
1.8/3kV 1 10~400
3 10~240

Wind power cable show

wind-power-cable-show.jpg

wind power cable.jpg

Any more detailed information can be offered as customer request.Simply send us a message,we will get to you right away.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification