Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • Marine Electric Anchor Windlass

    Overview
    The Marine Electric Anchor Windlass is core deck machinery installed on the vessel’s forecastle, powered by an electric motor, and mainly used for dropping, lifting, and holding the anchor & anchor chain. It can be designed as single gypsy, double gypsy, combined type with mooring drum, widely used on cargo ships, fishing vessels, work boats, barges, yachts and offshore support vessels. Compared with hydraulic windlass, the electric type features a simpler layout, less maintenance, no hydraulic oil leakage risk, easy wiring and operation. It consists of gypsywheel, gearbox, main shaft, electric motor, brake, clutch, etc.
    HI-SEA Marine’s electric windlasses are specified against the vessel’s chain diameter and grade, required continuous duty pull, deck layout and electrical supply, with capacity calculations and test records prepared for the nominated class society.
    Product Classification
    ✅ Marine Electric Single Gypsywheel Anchor Windlass
    ✅ Marine Electric Double Gypsywheel Anchor Windlass
    ✅ Marine Electric Combined Anchor Windlass

    Marine Electric Single Gypsywheel Anchor Windlass

    Marine Electric Double Gypsywheel Anchor Windlass

    Marine Electric Combined Anchor Windlass

    Technical Specifications
    The table below shows representative ranges. Custom chain diameters, pull ratings and electrical specifications are available on request.

    Parameter Specification Range
    Chain Diameter 14 mm – 120 mm+
    Chain Grade AM1 / AM2 / AM3
    Drive Type Electric motor with reduction gearbox
    Continuous Duty Pull (PC) Calculated per class rule (kN): 

    AM1/U1/Q1: PC = 0.0375d2

    AM2/U2/Q2: PC = 0.0425d2

    AM3/U3/Q3: PC = 0.0475d2

    where dd = chain diameter in mm

    Temporary Overload Pull ≥ 1.5 × PC, for at least 2 minutes
    Nominal Speed ≥ 0.15 m/s (average, over two shots of chain)
    Brake Holding Capacity ≥ 45% of chain breaking load (with chain stopper)

    ≥ 80% of chain breaking load (without chain stopper)

    Electrical Supply 380V/440V, 50Hz/60Hz, 3-phase (per vessel specification)
    Motor Protection IP56, insulation class F
    Control Local control; remote control optional
    Configuration Single gypsywheel / double gypsywheel; with or without warping head, combined type with mooring drum
    Certificate CCS / BV / RINA / IRS, etc, as required

    Key Advantages
    🔹 Electric frequency conversion optional, single-speed/double speed/three speed optional, stable anchor lifting
    🔹 Multi safety protection: overload protection, emergency stop, holding brake, limit alarm
    🔹 High marine anti-corrosion coating, suitable for saltwater harsh environment
    🔹 IP56 protection level, reliable for open deck
    🔹 Local control, wireless remote button box optional
    🔹 Less maintenance, no hydraulic pipeline, lower operation cost
    🔹 Customizable: chain diameter, pulling force, chain speed, voltage (380V/440V etc.)
    Frequently Asked Questions
    Q: What is the difference between electric anchor windlass and hydraulic anchor windlass?
    A: Electric windlass needs no hydraulic station and oil pipes, easier maintenance; hydraulic one has larger torque, more fit for super heavy-duty large vessels.
    Q: Can electric anchor windlass do mooring work?
    A: The combined type with warping drum/end/head or drum can perform mooring operation; pure anchor windlass only handles anchor and chain.
    Q: Can an electric windlass be supplied with a VFD?
    A: Yes. For larger motors or vessels with limited generator margin, we recommend a VFD to limit starting current and voltage dip.

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top