Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • Marine Hydraulic Anchor Windlass

    Overview
    Marine Hydraulic Anchor Windlass is heavy-duty deck machinery driven by a hydraulic power pack, designed for dropping, lifting and holding anchor and anchor chain. It features high torque, stable low-speed performance and strong overload resistance. Available in single gypsy, double gypsy and combined versions with warping drum. Widely adopted on large ocean-going cargo vessels, tankers, container ships, offshore support vessels and dredgers. It is the preferred anchoring equipment for heavy load working conditions compared with electric anchor windlass. It consists of hydraulic power unit, hydraulic motor, reduction gearbox, gypsywheel/sprocket/cable lifter, brake, clutch,  hydraulic control valve group, control system, base frame, etc.
    Product Classification
    ✅ Marine Hydraulic Single Gypsywheel Windlass
    ✅ Marine Hydraulic Double Gypsywheel Windlass
    ✅ Marine Hydraulic Combined Anchor Windlass

    Marine Hydraulic Single Gypsywheel Windlass

    Marine Hydraulic Double Gypsywheel Windlass

     

    Marine Hydraulic Combined Anchor Windlass

    Technical Specifications
    The table below shows representative ranges. Custom chain diameters, pull ratings and hydraulic system parameters are available on request.

    Parameter Specification Range
    Chain Diameter 14 mm – 120 mm+
    Chain Grade AM1 / AM2 / AM3
    Drive Type Hydraulic motor with reduction gearbox
    Continuous Duty Pull (PC) Calculated per class rule (kN):
    AM1/U1/Q1: PC = 0.0375d2|
    AM2/U2/Q2: PC = 0.0425d2
    AM3/U3/Q3: PC = 0.0475d2
    where dd = chain diameter in mm
    Temporary Overload Pull ≥ 1.5 × PC, for at least 2 minutes
    Nominal Speed ≥ 0.15 m/s (average, over two shots of chain)
    Brake Holding Capacity ≥ 45% of chain breaking load (with chain stopper)
    ≥ 80% of chain breaking load (without chain stopper)
    Hydraulic System Pressure Typically 9–13.5 MPa for mid-size units; higher for heavy-duty configurations
    Hydraulic Flow Matched to motor displacement and required hoisting speed
    Power pack option Dedicated power pack or integration with vessel’s central hydraulic system, electro-hydraulic, diesel engine driven hydraulic, shaft-driven hydraulic(PTO) optional.
    Control Local control; remote control from bridge or wheelhouse optional
    Configuration Single gypsywheel / double gypsywheel; with or without warping head, combined type with mooring drum
    Certificate CCS / BV / RINA / IRS, etc, as required

    Key Advantages
    🔹 Huge starting torque, stable low-speed running, smooth chain picking
    🔹 Strong overload capacity, suitable for large chain diameter and heavy anchor
    🔹 Stepless speed regulation through hydraulic control, easy speed adjustment|
    🔹 Reliable braking system, dual safety protection of hydraulic brake + mechanical brake
    🔹 Low running noise, stable performance under continuous heavy-duty operation
    🔹 Optional local control, bridge remote control and proportional control
    🔹 Heavy anti-corrosion paint system, salt fog resistant for long-term marine service
    🔹 Customizable: chain diameter, pulling force, chain speed, working pressure
    Frequently Asked Questions
    Q: What is the main difference between hydraulic anchor windlass and electric anchor windlass?
    A: Hydraulic type delivers larger torque and better overload performance, ideal for large heavy vessels; electric type has simpler structure, no hydraulic pipeline and lower maintenance cost, suitable for medium and small ships.
    Q: Does hydraulic windlass have leakage risk?
    A: Properly installed and regularly maintained hydraulic system can minimize leakage; we adopt high-quality sealing components for long service life.
    Q: Can your hydraulic windlass connect to the vessel’s existing central hydraulic system?
    A: Yes, provided the existing system can supply the required pressure and flow for the windlass motor. We review the vessel’s hydraulic system parameters (pressure, flow, oil cleanliness, cooling capacity) before quotation and confirm whether direct integration is feasible or a dedicated power pack is required.
    Q: What hydraulic pressure and flow does the windlass require?
    A: Mid-size units typically operate around 9-13.5 MPa, with flow matched to motor displacement and required hoisting speed. The exact pressure and flow depend on chain diameter, required working load, nominal speed and gearbox ratio. Provide your chain specification and available hydraulic system parameters, and we will confirm the motor and power pack requirements.
    Q: What maintenance does a hydraulic windlass require?
    A: Regular maintenance includes hydraulic oil analysis, filter changes, leak inspection, hose and seal inspection, brake adjustment and load-bearing component inspection. Oil cleanliness is critical to hydraulic motor and valve life

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top