Overview
This is a flanged marine sight glass (flow observer): the top sight window allows direct visual inspection of flowing medium, while the full-bore straight passage keeps flow resistance low. It is specified for fresh water, seawater, lube oil, fuel oil and cooling circuits in ship piping systems. One fitting replaces a short pipe section plus a separate inspection point, so you add only one flanged joint and save layout space — a benefit that matters on crowded engine room and pump room horizontal runs.
Body and cover are cast HT200 gray cast iron as standard, supplied with epoxy paint for general fresh water, lube oil and air lines. Ductile iron QT450, cast carbon steel WCB, tin bronze ZCuSn10Zn2 and CF8 / CF8M stainless steel are optional where seawater, erosion-corrosion or higher pressure demand better strength and chloride resistance. The sight window is tempered borosilicate glass, selected for transparency and thermal shock resistance; sealing elements follow the medium: NBR / EPDM for water and oil, PTFE for chemical and higher-temperature service. Fasteners are carbon steel or stainless steel on request.
Design, materials, testing and marking follow CB/T 422‑93, with strength, tightness, wall thickness and dimensional tolerances referenced to related marine piping standards. Every casting batch keeps test specimens stamped with the heat number and retained for traceability. Every single unit is pressure-tested and inspected before shipment. Full test clauses, tolerances and weights are listed in the tables below.
Basic Sructure of CB/T422-93 Sight Glass Type J/JS

Basic parameters(CB/T422-93)
| Type | Nominal Pressure PN (MPa) | Nominal Diameter DN (mm) | Applicable Medium | Max. Working Temperature (℃) | Flange Standard | Installation |
|---|---|---|---|---|---|---|
| J type | 0.4 | 40~50 | Seawater, fresh water, oil (excluding heavy fuel oil) | 120 | GB 569 | Horizontal installation, sight glass upward |
| 0.25 | 65~100 | |||||
| JS type | 0.4 | 20~50 | GB 2501 | |||
| 0.25 | 65~200 | |||||
| T type, TS type | 0.1 | 25~200 | Water and oil for overflow pipelines | 70 | T:GB 569
TS:GB 2501 |
Horizontal installation, sight glass upward |
Working Principle
The flow sight glass is a straight-through visual monitoring component with no moving actuating parts. The medium flows in through one flange, passes through the full-bore cavity and flows out from the other flange. A transparent sight plate is fitted on the top. Operators can directly observe the internal flow condition through the sight window to check flow status, no-flow condition, air bubbles or impurities. It only provides a visual viewing channel. It will not change medium pressure or flow rate and has no shut-off function.
Basic Dimensions of J-Type Flow Sight Glass(CB/T422-93)
| Nominal Pressure PN (MPa) | Nominal Diameter DN | Overall Dimension | Wall Thickness δ | Flange | Bolt | Glass Thickness | Weight (kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | d₁ | D | D₁ | D₂ | d₀ | b | n | Th | |||||
| 0.4 | 40 | 160 | 40 | 8 | 125 | 93 | 74 | 15 | 16 | 6 | M14 | 6 | 5.6 |
| 50 | 164 | 50 | 8 | 135 | 103 | 84 | 15 | 16 | 6 | M14 | 6 | 6.3 | |
|
0.25 |
65 | 196 | 65 | 9 | 155 | 123 | 104 | 15 | 15 | 8 | M14 | 8 | 11.3 |
| 80 | 220 | 80 | 9 | 170 | 138 | 118 | 15 | 15 | 8 | M14 | 8 | 13.1 | |
| 100 | 250 | 100 | 10 | 190 | 158 | 138 | 15 | 15 | 8 | M14 | 8 | 16.6 | |
Basic Dimensions of JS-Type Flow Sight Glass(CB/T422-93)
| Nominal Pressure PN (MPa) | Nominal Diameter DN | Overall Dimension | Wall Thickness δ | Flange | Bolt | Glass Thickness | Weight (kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | d₁ | D | D₁ | D₂ | d₀ | b | n | Th | |||||
| 0.4 | 20 | 110 | 20 | 7 | 90 | 65 | 50 | 11 | 14 | 4 | M10 | 6 | 0.95 |
| 25 | 140 | 25 | 7 | 100 | 75 | 60 | 11 | 14 | 4 | M10 | 6 | 1.43 | |
| 32 | 140 | 32 | 7 | 120 | 90 | 70 | 14 | 16 | 4 | M12 | 6 | 4.64 | |
| 40 | 160 | 40 | 8 | 130 | 100 | 80 | 14 | 16 | 4 | M12 | 6 | 6.22 | |
| 50 | 164 | 50 | 8 | 140 | 110 | 90 | 14 | 16 | 4 | M12 | 6 | 6.95 | |
| 0.25 | 65 | 196 | 65 | 9 | 160 | 130 | 110 | 18 | 18 | 8 | M16 | 8 | 12.11 |
| 80 | 220 | 80 | 9 | 190 | 150 | 128 | 18 | 18 | 8 | M16 | 8 | 14.14 | |
| 100 | 250 | 100 | 10 | 210 | 170 | 148 | 18 | 20 | 8 | M16 | 10 | 18.41 | |
| 125 | 280 | 125 | 10 | 240 | 200 | 178 | 18 | 20 | 8 | M16 | 10 | 25.30 | |
| 150 | 310 | 150 | 10 | 265 | 225 | 202 | 18 | 20 | 8 | M16 | 10 | 29.34 | |
| 175 | 338 | 175 | 11 | 295 | 255 | 232 | 18 | 22 | 8 | M16 | 12 | 30.20 | |
| 200 | 370 | 200 | 11 | 320 | 280 | 258 | 18 | 22 | 8 | M16 | 12 | 31.25 |
Materials of Principle Parts(CB/T422-93)
| Part Name | Material | ||
|---|---|---|---|
| Name | Grade | Standard No. | |
| Body | Cast Iron | HT200 | GB 9439-88 |
| Cover Plate | Carbon Steel | Q235-A | GB 700-88 |
| Sight Plate ¹) | Ordinary Glass | — | — |
| Threaded Cap | Cast Tin Bronze | ZQSn10-2 | CB 883-83 |
| Sight Tube | Acrylic (Polymethyl Methacrylate) | — | GB 7134-86 |
Selection & Installation Key Points
1.Selection: For liquid only (fresh water, seawater, lube oil, oil excluding heavy fuel oil), ≤120℃ for J/JS type and ≤70℃ for T/TS type. Select sight glass type according to medium, pressure and flow rate; confirm material option for corrosion resistance.
2.Installation orientation: Shall be installed horizontally on pipelines with sight window facing upward. Reserve sufficient surrounding space for inspection and glass replacement. FORBIDDEN: Do not use for pressure bearing, flow regulation or throttling.
3.Sight plate: Tempered borosilicate glass, suitable for clean liquid without sharp hard solid particles. Avoid impact, scratch and thermal shock to the glass.
4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects glass safety; keep operating pressure and temperature below the rated value of selected type.
5.Flow & clearance: Bidirectional flow, no flow direction restriction. Isolate upstream and downstream media by isolating valves before disassembly; avoid impurities impacting the sight glass.
Why this sight glass
One integrated structure: the straight full-bore body is the main component. The top sight window allows direct visual observation of liquid flow condition inside the pipeline. One flange connection, simple structure, fewer spare parts. It is a passive visual component with no flow cut-off function. The full-bore straight passage brings low flow resistance and will not interfere with medium delivery. The compact structure brings easy installation and maintenance. The sight glass can be disassembled for glass inspection and replacement, with direct access to the sight plate; no heavy dismantling of adjacent pipelines. Wetted materials are optional on order: cast iron HT200, cast bronze or stainless steel for body, tempered borosilicate sight glass, rubber or PTFE gasket, suitable for fresh water, seawater, lube oil and overflow oil circuit.
What it is not: a shut-off valve or regulating valve. It is only for flow observation; it cannot bear excessive pressure or be used for throttling, and sharp particles will cause rapid damage to the sight plate.