Overview
The A and AS types are straight‑pattern flanged globe valves built for isolation duty in shipboard piping systems handling seawater and fresh water. Both share one valve body design; the difference is the flange interface — the A type is drilled to GB 569, the AS type to GB 2501. The range covers PN0.6 / PN1.0 / PN1.6, with DN40‑150 for PN1.6, DN65‑150 for PN1.0 and DN200‑250 for PN0.6. Manual handwheel operation, bolted bonnet, and a metal‑seated disc give predictable isolation where elastomer‑seated valves would age under marine seawater service.
Material selection follows the medium, not the price list. Body and bonnet are cast carbon steel, typically 35# steel for marine seawater and fresh water service; the trim is all bronze — tin‑bronze disc, aluminium‑bronze seat, aluminium‑bronze stem — which resists galling and marine corrosion without a soft seat insert. Packing and gasket are PTFE for water service. Note that aluminium bronze carries a dealuminisation risk in sea water; an anti‑dealuminisation treatment can be specified for long‑immersion seawater lines.
Every valve is designed, manufactured and accepted against CB/T 3196‑1995, with strength, tightness, wall thickness, dimensional and geometric tolerances referenced to GB/T 600—2023. Mass is controlled to within +4 % of theoretical, castings are traceable by heat number for a minimum of three years, and marking follows GB/T 3032. Clause‑by‑clause verification data is listed in the compliance section below.
Basic Sructure Of Type A/AS Flanged Cast Steel Seawater Globe Valve

TypeA/AS
Basic parameters(CB/T 3196-95 )
| Type | Description | Nominal Pressure PN (MPa) | Nominal Diameter DN (mm) | Medium | Working Temperature | Flange Standard | Installation |
|---|---|---|---|---|---|---|---|
| A | Straight pattern globe valve | 1.6 | 40~150 | Seawater, fresh water | ≤120℃ | GB 569 | Horizontal installation preferred |
| AS | Straight pattern globe valve | 1.0 | 65~150 | Seawater, fresh water | ≤120℃ | GB 2501 | Horizontal installation preferred |
| B | Angle pattern globe valve | 0.6 | 200~250 | Seawater, fresh water | ≤120℃ | GB 569 | Horizontal installation preferred |
| BS | Angle pattern globe valve | 0.6 | 200~250 | Seawater, fresh water | ≤120℃ | GB 2501 | Horizontal installation preferred |
Working Principle
It is a rising‑stem globe valve. Rotating the handwheel lifts or lowers the stem and disc to open or close against the seat. It can cut off or throttle the flow of seawater and fresh water.
Basic Dimensions of Type A Flanged Cast Steel Seawater Globe Valve(CB/T 3196-95 )
| Nominal Pressure PN (MPa) | Nominal Diameter DN (mm) | Structural dimensions (mm) | Flange connection dimensions (mm) | Bolts | Handwheel (mm) | Lift (mm) | Weight (kg) Type A | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | L | D | D₁ | D₂ | d₀ | b | n | Th. | D₀ | □ | m | |||
| 1.6 | 40 | 260 | 200 | 125 | 93 | 74 | 15 | 13 | 6 | M14 | 120 | 11 | 12 | 9 |
| 1.6 | 50 | 288 | 230 | 135 | 103 | 84 | 15 | 13 | 6 | M14 | 140 | 12 | 15 | 11 |
| 1.6 | 65 | 335 | 290 | 170 | 132 | 110 | 15 | 15 | 8 | M16 | 160 | 14 | 19 | 19 |
| 1.6 | 80 | 366 | 310 | 185 | 147 | 126 | 17 | 16 | 10 | M16 | 200 | 17 | 23 | 25 |
| 1.6 | 100 | 427 | 350 | 205 | 167 | 146 | 17 | 16 | 10 | M16 | 250 | 22 | 28 | 36 |
| 1.6 | 125 | 465 | 400 | 225 | 187 | 168 | 17 | 15 | 12 | M16 | 250 | 22 | 35 | 81 |
| 1.6 | 150 | 524 | 480 | 255 | 217 | 196 | 17 | 15 | 12 | M16 | 280 | 24 | 42 | 81 |
| 1.0 | 65 | 310 | 290 | 155 | 123 | 104 | 15 | 14 | 6 | M14 | 140 | 12 | 19 | 17 |
| 1.0 | 80 | 345 | 310 | 170 | 138 | 118 | 15 | 14 | 8 | M14 | 160 | 14 | 23 | 20 |
| 1.0 | 100 | 374 | 350 | 190 | 158 | 138 | 15 | 14 | 8 | M14 | 180 | 14 | 28 | 29 |
| 1.0 | 125 | 426 | 400 | 215 | 183 | 164 | 15 | 14 | 10 | M14 | 200 | 17 | 35 | 39 |
| 1.0 | 150 | 487 | 480 | 240 | 208 | 190 | 15 | 14 | 12 | M14 | 200 | 17 | 42 | 52 |
| 0.6 | 200 | 630 | 600 | 295 | 264 | 247 | 15 | 15 | 14 | M16 | 360 | 27 | 68 | 85 |
| 0.6 | 250 | 743 | 730 | 365 | 327 | 306 | 17 | 16 | 14 | M16 | 450 | 32 | 80 | 134 |
Basic Dimensions of Type AS Flanged Cast Steel Seawater Globe Valve(CB/T 3196-95 )
| Nominal Pressure PN (MPa) | Nominal Diameter DN (mm) | Structural dimensions (AS type) | Flange connection dimensions (mm) |
Bolts | Handwheel (mm) | Lift (mm) | Weight (kg) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | L | D | D₁ | D₂ | d₀ | b | n | Th. | D₀ | □ | m | AS type | ||
| 1.6 | 40 | 260 | 200 | 150 | 110 | 88 | 18 | 18 | 4 | M16 | 120 | 11 | 12 | 10 |
| 1.6 | 50 | 288 | 230 | 165 | 125 | 102 | 18 | 20 | 4 | M16 | 140 | 12 | 15 | 12 |
| 1.6 | 65 | 335 | 290 | 185 | 145 | 122 | 18 | 20 | 4 | M16 | 160 | 14 | 19 | 20 |
| 1.6 | 80 | 366 | 310 | 200 | 160 | 133 | 18 | 22 | 8 | M16 | 200 | 17 | 23 | 26 |
| 1.6 | 100 | 427 | 350 | 220 | 180 | 158 | 18 | 22 | 8 | M16 | 250 | 22 | 28 | 37 |
| 1.6 | 125 | 465 | 400 | 250 | 210 | 184 | 18 | 24 | 8 | M16 | 250 | 22 | 35 | 62 |
| 1.6 | 150 | 524 | 480 | 285 | 240 | 212 | 22 | 24 | 8 | M20 | 280 | 24 | 42 | 90 |
| 1.0 | 65 | 310 | 290 | 185 | 145 | 122 | 18 | 20 | 4 | M16 | 140 | 12 | 19 | 20 |
| 1.0 | 80 | 345 | 310 | 200 | 160 | 133 | 18 | 22 | 8 | M16 | 160 | 14 | 23 | 26 |
| 1.0 | 100 | 374 | 350 | 220 | 180 | 158 | 18 | 22 | 8 | M16 | 180 | 14 | 28 | 37 |
| 1.0 | 125 | 426 | 400 | 250 | 210 | 184 | 18 | 24 | 8 | M16 | 200 | 17 | 35 | 62 |
| 1.0 | 150 | 487 | 480 | 285 | 240 | 212 | 22 | 24 | 8 | M20 | 200 | 17 | 42 | 90 |
| 0.6 | 200 | 630 | 600 | 320 | 280 | 258 | 18 | 22 | 8 | M16 | 360 | 27 | 68 | 100 |
| 0.6 | 250 | 743 | 730 | 375 | 335 | 312 | 18 | 24 | 12 | M16 | 450 | 32 | 80 | 140 |
Materials of Principle Parts(CB/T 3196-95 )
| Part Name | Material Grade | Standard |
|---|---|---|
| Valve Body & Bonnet | Cast Steel ZG230-450 | CB 772-86 |
| Valve Disc | Cast Tin Bronze ZQSn10-2 | CB 883-83 |
| Valve Stem | Aluminum Bronze QA19-2 | GB 4429-84 |
| Valve Seat | Cast Aluminum Bronze ZQAl9-2 | CB 883-83 |
Selection & Installation Key Points
1.Selection: For seawater / fresh water only, ≤120℃. Select this marine cast steel globe valve according to pipeline size; confirm bronze internal parts for marine corrosion resistance.
2.Installation orientation: Can be installed horizontally. Keep the valve mark of flow direction consistent with pipeline flow direction. Reserve sufficient surrounding space for adjustment and maintenance. FORBIDDEN: Do not use for throttling for long time.
3.Sealing pair: Bronze valve disc and bronze valve seat, suitable for water medium. Avoid sand, metal debris and hard impurities scratching the sealing surface.
4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected grade.
5.Flow & clearance: Unidirectional flow. Isolate upstream medium by closing the front stop valve before disassembly; avoid medium leakage.
Why this Marine Cast Steel Globe Valve
One integrated structure: The cast steel valve body and bonnet are the main components. Rotating the handwheel drives the stem and disc to open or close the passage. Flange connection, compact structure, reliable sealing and easy operation. It is a cut-off component for marine seawater and fresh water pipeline. The internal flow channel is specially designed for ship water system. The bronze disc-seat sealing pair features good seawater corrosion resistance, long service life and good tightness. The valve can be disassembled for inspection and replacement of wearing parts, without heavy dismantling of adjacent pipelines. Wetted materials: ZG230-450 cast steel body & bonnet, ZCuSn10Zn2 cast tin bronze disc, ZCuAl9Mn2 cast aluminum bronze seat, QAl9-2 aluminum bronze stem, suitable for marine water pipeline. What it is not: a throttling component. It is only for medium cut-off; long-time throttling will cause rapid wear to the sealing surface.