Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • CB T692-1994 Type A/AS Oil Tank Breather Valve

    Overview
    The simplex marine oil tank breather valve conforming to CB/T692-1994 is a flanged cast safety fitting built for pressure and vacuum balancing duty on cargo oil tank vent piping of oil tankers handling crude oil, gasoline, kerosene and diesel media.All variants share one valve body design with optional flange connections. The range covers conventional marine pressure ratings, with standard sizes DN80, DN100 and DN150 available. Manual handwheel operation, bolted bonnet and integrated pressure-vacuum discs deliver dual performance: the handwheel can positively close the valve for isolation during overhaul, while the free discs automatically act to release overpressure outward or admit air to relieve vacuum inside the tank, offering reliable tank structure protection and reduced hydrocarbon vapor loss under marine corrosive service conditions. Material selection follows the medium, not the price list. Body and bonnet are normally cast iron or cast steel; stainless steel guide spindles and valve discs are adopted for enhanced corrosion resistance against marine atmosphere and oil vapour; the sealing structure maintains stable opening and closing pressure without premature sticking. Gaskets are oil-resistant composite material for hydrocarbon service. Cast metal construction provides reliable mechanical strength and good vibration resistance under deck operating conditions. Every valve is designed, manufactured and accepted against CB/T692-1994, with strength, tightness, wall thickness, dimensional and geometric tolerances referenced to GB/T 600—2023. Mass is controlled within agreed tolerance, castings are traceable by heat number for a minimum of three years, and marking follows GB/T 3032. Clause-by-clause verification data is listed in the compliance section below.
    Basic Sructure of  Type A/AS Oil Tank Breather Valve

     

     

     

     

     


    1—Pull ring 2—Adjusting sleeve 3—Valve cover 4—Valve body 5—Valve seat 6—Metal flame arrester screen 7—Suction port hood 8—Valve disc
    9—Spring 10—Spring upper plate 11—Guide rod 12—Sealing ring 13—Valve stem 14—Bushing

    Basic parameters (CB T692-1994)

    Type Working Pressure P (MPa) Nominal Diameter DN/DN₁ (mm)
    Pressure Valve Vacuum Valve
    A, AS ≤ +0.021 < −0.007 80/100
    B, BS ≤ +0.021 < −0.007 100/150

    This CB/T692-1994 marine oil tank breather valve (P/V valve) is designed for the venting pressure-vacuum system of cargo oil tanks on oil tankers. It is also applicable to fuel oil tanks and lube oil tanks of seagoing vessels and inland waterway ships. It automatically balances tank internal pressure during loading, discharging and temperature change, to avoid tank damage caused by overpressure or excessive vacuum.
    Working Principle
    The CB/T692-1994 marine oil tank breather valve integrates a pressure valve and a vacuum valve.When the internal tank pressure rises and reaches the set positive pressure value (≤ +0.021 MPa), the pressure valve opens automatically to release excess gas, so as to prevent overpressure damage to the tank.When the tank pressure drops and reaches the set negative pressure value (< −0.007 MPa), the vacuum valve opens automatically to draw in outside air and avoid excessive vacuum collapse of the tank.
    Under normal conditions, both valves remain closed to reduce the evaporation loss of oil and prevent seawater, rain and spray from entering the tank.
    Basic Dimensions of  Type A Oil Tank Breather Valve (unit:mm/kg)

    Nominal Diameter

    DN/DN₁

    Structural Dimensions Wall Thickness δ
    H H₁ L L₁ Cast Iron Cast Steel
    Type A Type A Type A Type A
    80/100 248 100 260 135 8 6
    100/150 290 136 300 140 9 7

    Flange Connection Dimensions(unit:mm/kg)

    Nominal Diameter DN/DN₁ Tank Nozzle Flange Bolt Outlet Flange Bolt Weight(kg)
    D D1 D2 b d₀ n (pcs) Th. D’ D1′ D2′ b’ d₀’ n (pcs) Th. Type A

    Cast Iron

    Type A

    Cast Steel

    80/100 170 138 118 14 15 8 M14 190 158 138 14 15 8 M14 25.75 23.26
    100/150 190 158 138 14 15 8 M14 240 208 190 14 15 12 M14 38.32 35.54

    Basic Dimensions of  Type AS Oil Tank Breather Valve(unit:mm/kg)

    Nominal Diameter

    DN/DN₁

    Structural Dimensions Wall Thickness δ
    H H₁ L L₁ Cast Iron Cast Steel
    Type AS Type AS Type AS Type AS
    80/100 248 100 260 135 8 6
    100/150 290 136 300 140 9 7

    Flange Connection Dimensions(unit:mm/kg)

    Nominal Diameter DN/DN₁ Tank Nozzle Flange Bolt Outlet Flange Bolt Weight
    D D1 D2 b d₀ n (pcs) Th. D’ D1′ D2′ b’ d₀’ n (pcs) Th. Type AS

    Cast Iron

    Type AS

    Cast Steel

    80/100 190 158 128 18 18 4 M16 210 170 148 18 18 4 M16 29.97 28.86
    100/150 210 170 148 18 18 4 M16 265 225 202 20 18 8 M16 44.86 43.05

    Material of Construction(CB T692-1994 Type A/AS Oil Tank Breather Valve)

    Part Name Material
    Name Grade Standard No.
    Valve Body Cast Steel ZG230–450 CB772–86
    Valve Cover Grey Cast Iron HT200 GB9439–88
    Suction Inlet Outer Cover — — —
    Guide Rod Stainless Steel 2Cr13 GB1220–84
    Rocking Arm Carbon Steel Q235–A GB700–88
    Pull Ring Carbon Steel Q235–A GB700–88
    Valve Disc — — —
    Valve Seat Cast Aluminium Bronze ZQAl9–2 CB883–83
    Spring Upper Plate Cast Aluminium Bronze ZQAl9–2 CB883–83
    Weight Block — — —
    Adjusting Sleeve — — —
    Valve Stem Aluminium Bronze Rod QAl9–2 GB4429–84
    Spring Silicon Bronze QSi3–1 GB4431–84
    Metal Water-proof Net Cover Cast Manganese Brass ZHMn58–2 CB883–83
    Bushing Cast Manganese Brass ZHMn58–2 CB883–83
    Sealing Ring Industrial Vulcanized Rubber Sheet 3709 GB5574–85

    Selection & Installation Key Points
    1.Selection: For oil tank vapour, inert gas and compatible marine media, set pressure: +0.021 MPa / -0.007 MPa. Complies with CB/T692-1994 Marine Oil Tank Breather Valve standard. Select according to tank capacity and pipeline size; confirm bronze & stainless steel wetted parts for marine corrosion resistance.
    2.Installation orientation: Install vertically on the top of cargo oil tank only. Keep the ventilation mark consistent with tank venting direction. Reserve sufficient surrounding space for inspection and cleaning. FORBIDDEN: Do not install horizontally or upside down; do not use as a shut-off valve or throttling device.
    3.Sealing pair: Rubber sealing ring for airtight closing, matched with gravity weight or spring assembly, suitable for oil vapour and inert gas service. Avoid sand, paint debris and hard impurities sticking on the sealing face to prevent leakage.
    4.Temp-pressure: Rated opening / vacuum setting pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected grade. This valve adapts to working temperature from -20℃ to +80℃.
    5.Flow & clearance: Two-way pressure balance. It can exhaust automatically when tank overpressure occurs and inhale automatically when tank vacuum forms. Isolate upstream medium by closing the isolating valve before disassembly; avoid oil vapour overflow or air ingress.
    Why this Marine Oil Tank Breather Valve (CB/T692-1994)
    One integrated structure: The cast steel or grey cast iron valve body and bonnet are the main components. Internal gravity weight or spring assembly controls positive pressure exhaust and vacuum suction, and it can automatically close to prevent flame flashback, rainwater and seawater ingress. Flange connection complying with GB/T569 or GB2501, compact structure, reliable sealing and maintenance-friendly. It is a combined pressure-vacuum balance component for cargo oil tanks of oil tankers, bulk carriers and vessels. The internal flow channel is specially designed for ship oil tank vent system. Bronze and stainless steel wetted parts feature excellent seawater corrosion resistance, stable set pressure, long service life and good tightness. The valve can be disassembled for inspection and replacement of sealing ring, spring and weight block, without heavy dismantling of adjacent pipelines. Wetted materials: ZG230-450 cast steel / HT200 grey cast iron body, ZQAl9-2 aluminium bronze valve seat, QSi3-1 silicon bronze spring, 2Cr13 stainless steel guide rod, vulcanized rubber sealing ring. What it is not: A shut-off valve. It is only for oil tank pressure balance and waterproof protection; long-term exposure to oil vapour will accelerate rubber ageing.

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top