Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • JIS Marine Valve

    Application:

    JIS marine valves are primarily used in shipboard piping systems for seawater, fresh water, fuel oil, lubricating oil, steam, firefighting water, and wastewater, performing functions such as shutoff, regulation, backflow prevention, and pressure control. The valve bodies are subjected to hydrostatic and seal pressure tests in accordance with the JIS F standard, and certificates from classification societies such as NK, CCS, ABS, and BV can be obtained, meeting the SOLAS ship safety regulations

    Key Materials and Features:

    Cast steel:(SC49)

    Reference Valves: Major Valve Standards: JIS F3059, JIS F3060 cast steel storm valves; JIS F7311, JIS F7313 cast steel globe valves; JIS F7473, JIS F7474 cast steel SDNR valves

    Cast steel valves are high-strength, heat-resistant, and impact-resistant, making them suitable for high-temperature and high-pressure applications; they can be manufactured as 16K and 20K high-pressure valves; they are also suitable for high-temperature, high-pressure media such as saturated steam, high-temperature lubricating oil, high-pressure fuel, and compressed air

    Cast Iron:(FC200)

    Reference Valves: JIS F7364, JIS F7363 cast iron gate valves; JIS F7305 cast iron globe valves; JIS F7353 cast iron globe check valves

    The flake graphite structure of cast iron valves absorbs vibrations, making them ideally suited for the continuous vibration conditions found in ship engine rooms; they are less prone to abnormal noises or loosening caused by vibration

    They are primarily suitable for 5K and 10K pressure pipelines; the valve body is made of cast iron, while the seat and stem are typically fitted with bronze or stainless steel internals to enhance sealing and wear resistance

    Ductile iron:(QT450)

    Reference Valves: JIS F7480 Ductile Iron Center Butterfly Valve

    Suitable for 5K, 10K, and 16K Japanese Standard butterfly valves; ductile iron butterfly valves are lightweight, making them easy to install in confined engine room spaces, and are available in wafer-type and lug-type configurations

    Ductile iron offers superior wear resistance compared to ordinary cast iron and provides a certain degree of corrosion resistance against marine media such as seawater. When paired with a bronze disc and EPDM/NBR seats, these valves strike a balance between corrosion resistance and cost-effectiveness

    Bronze:(BC6)

    Reference Valves: JIS F7301, JIS F7303 Bronze Globe Valves, JIS F7356, JIS F7371 Bronze Check Valves, JIS F7334 Hose Valves

    Bronze offers excellent resistance to seawater corrosion, dezincification, and marine biofouling, making it the standard material for Japanese-style ship seawater piping and seawater-connecting valves; Self-lubricating and wear-resistant, with a long service life for sealing surfaces and low risk of seizing; Suitable for seawater, fire main lines, seawater access valves, subsea valves, and seawater intake valves

    Key Standards:

    Main Type JIS Standard Main Description
    Marine Globe Valve JIS F7301 JIS 5K,size DN15-DN65; Body material BC6 bronze, excellent seawater corrosion resistance
    JIS F7311 JIS 5K,size DN15-DN65;Body material cast steel. Suitable for low pressure steam, fuel oil, lube oil, fresh water and compressed air.
    JIS F7313 JIS 20K,size: DN32-DN250; Designed for high pressure steam, hot lube oil, fuel oil and compressed air, max temp up to 250℃
    Marine SDNR Valve JIS F7409 JIS 16K,size: DN15-DN40; Body material BC6 bronze.

    Dual function: manual shut-off + automatic non-return to prevent backflow.

    Suitable for seawater, fuel oil, lube oil, air and low pressure steam.

    Marine Check Valve JIS F7356, JIS F7371 JIS 5K,size:DN15-DN40; Only non-return function (no manual shut-off), suitable for seawater, fresh water, fuel oil, lube oil and air.
    Marine Quick Closing valve JIS F7399 JIS 5K,10K, Size:DN15-DN100; Dual operation: normal handwheel operation + remote wire / pneumatic emergency trip shut-off.

    It locks after emergency closing and requires manual reset. For fuel tank inlet & outlet lines

    Marine Storm Valve JIS F3060 JIS 5K,10K,Size: DN50-DN200; Dual function: automatic non-return to prevent seawater backwash in heavy sea, plus manual screw-down closing device for positive shut-off during maintenance
    Marine Gate Valve JIS F7363 JIS 5K,Size:DN50-DN400; Full bore, low pressure drop, bi-directional flow, only for on/off isolation, not for throttling

    Pressure Test:

    JIS F7400:2015 is the general test & inspection standard for JIS marine valves.

    It covers material check, visual & dimension inspection, operation test, shell hydrostatic test and seat tightness test

    Test medium is clean water. Shell test pressure and seat test pressure for 5K /10K /16K /20K

    All JIS F series globe valve, gate valve, check valve, SDNR, storm valve, quick closing valve are tested per JIS F7400. Class survey witness test available upon request

    Valve Inspection and Details:

    Appearance & Marking Inspection

    The valve body must be free of cracks, porosity, shrinkage, and sand holes; the flange sealing surfaces must be free of impact damage

    The markings on the valve body must be clear: standard number, K-class, DN (A), material, and flow direction arrow

    Coating: Inspect the epoxy coating on cast iron/ductile iron surfaces for sagging or pinholes; measure coating thickness (often required for seawater valves)

    Dimensional Inspection: Flange outer diameter, bolt hole center circle, number of bolt holes / hole diameter, flange thickness, structural length, and nominal diameter; verify against JIS B2220 and the corresponding JIS F valve standards

    Operational Test

    Handwheel operation is smooth, with no sticking or abnormal friction; valve stem movement is steady, and the packing gland is neither too tight nor too loose

    Gate Valves: Fully open and fully closed positions; Globe Valves: Smooth regulationCheck Valves (F7356/F7371): Disc moves freely without jamming

    SDNR Globe Check Valves (F7409): Locking by pressing down the handwheel; automatic check valve operation upon release functions normally

    Storm Valves F3060: Verification of automatic check valve function + handwheel forced locking function

    Quick-closing Valves F7399: Verify handwheel operation, remote cable-pull quick-close, self-locking, and local reset functions

    Hydrostatic Test (Core Acceptance Item; clean water at ambient temperature)

    Pressure-rising requirements: Raise pressure gradually to avoid water hammer; pressure holding time: DN ≤ 50 ≥ 30 s; DN > 50 ≥ 60 s

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top