Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • CB/T 3196-95 Type A/AS Flanged Cast Steel Seawater Globe Valve

    Overview
    The A and AS types are straight‑pattern flanged globe valves built for isolation duty in shipboard piping systems handling seawater and fresh water. Both share one valve body design; the difference is the flange interface — the A type is drilled to GB 569, the AS type to GB 2501. The range covers PN0.6 / PN1.0 / PN1.6, with DN40‑150 for PN1.6, DN65‑150 for PN1.0 and DN200‑250 for PN0.6. Manual handwheel operation, bolted bonnet, and a metal‑seated disc give predictable isolation where elastomer‑seated valves would age under marine seawater service.
    Material selection follows the medium, not the price list. Body and bonnet are cast carbon steel, typically 35# steel for marine seawater and fresh water service; the trim is all bronze — tin‑bronze disc, aluminium‑bronze seat, aluminium‑bronze stem — which resists galling and marine corrosion without a soft seat insert. Packing and gasket are PTFE for water service. Note that aluminium bronze carries a dealuminisation risk in sea water; an anti‑dealuminisation treatment can be specified for long‑immersion seawater lines.
    Every valve is designed, manufactured and accepted against CB/T 3196‑1995, with strength, tightness, wall thickness, dimensional and geometric tolerances referenced to GB/T 600—2023. Mass is controlled to within +4 % of theoretical, castings are traceable by heat number for a minimum of three years, and marking follows GB/T 3032. Clause‑by‑clause verification data is listed in the compliance section below.
    Basic Sructure Of Type A/AS Flanged Cast Steel Seawater Globe Valve


                                                                   TypeA/AS
    Basic parameters(CB/T 3196-95 )

    Type Description Nominal Pressure PN (MPa) Nominal Diameter DN (mm) Medium Working Temperature Flange Standard Installation
    A Straight pattern globe valve 1.6 40~150 Seawater, fresh water ≤120℃ GB 569 Horizontal installation preferred
    AS Straight pattern globe valve 1.0 65~150 Seawater, fresh water ≤120℃ GB 2501 Horizontal installation preferred
    B Angle pattern globe valve 0.6 200~250 Seawater, fresh water ≤120℃ GB 569 Horizontal installation preferred
    BS Angle pattern globe valve 0.6 200~250 Seawater, fresh water ≤120℃ GB 2501 Horizontal installation preferred

    Working Principle
    It is a rising‑stem globe valve. Rotating the handwheel lifts or lowers the stem and disc to open or close against the seat. It can cut off or throttle the flow of seawater and fresh water.
    Basic Dimensions of Type A Flanged Cast Steel Seawater Globe Valve(CB/T 3196-95 )

    Nominal Pressure PN (MPa) Nominal Diameter DN (mm) Structural dimensions (mm) Flange connection dimensions (mm) Bolts Handwheel (mm) Lift (mm) Weight (kg) Type A
    H L D D₁ D₂ d₀ b n Th. D₀ □ m
    1.6 40 260 200 125 93 74 15 13 6 M14 120 11 12 9
    1.6 50 288 230 135 103 84 15 13 6 M14 140 12 15 11
    1.6 65 335 290 170 132 110 15 15 8 M16 160 14 19 19
    1.6 80 366 310 185 147 126 17 16 10 M16 200 17 23 25
    1.6 100 427 350 205 167 146 17 16 10 M16 250 22 28 36
    1.6 125 465 400 225 187 168 17 15 12 M16 250 22 35 81
    1.6 150 524 480 255 217 196 17 15 12 M16 280 24 42 81
    1.0 65 310 290 155 123 104 15 14 6 M14 140 12 19 17
    1.0 80 345 310 170 138 118 15 14 8 M14 160 14 23 20
    1.0 100 374 350 190 158 138 15 14 8 M14 180 14 28 29
    1.0 125 426 400 215 183 164 15 14 10 M14 200 17 35 39
    1.0 150 487 480 240 208 190 15 14 12 M14 200 17 42 52
    0.6 200 630 600 295 264 247 15 15 14 M16 360 27 68 85
    0.6 250 743 730 365 327 306 17 16 14 M16 450 32 80 134

    Basic Dimensions of Type AS Flanged Cast Steel Seawater Globe Valve(CB/T 3196-95 )

    Nominal Pressure PN (MPa) Nominal Diameter DN (mm) Structural dimensions (AS type) Flange connection dimensions (mm)




    Bolts Handwheel (mm) Lift (mm) Weight (kg) 
    H L D D₁ D₂ d₀ b n Th. D₀ □ m AS type
    1.6 40 260 200 150 110 88 18 18 4 M16 120 11 12 10
    1.6 50 288 230 165 125 102 18 20 4 M16 140 12 15 12
    1.6 65 335 290 185 145 122 18 20 4 M16 160 14 19 20
    1.6 80 366 310 200 160 133 18 22 8 M16 200 17 23 26
    1.6 100 427 350 220 180 158 18 22 8 M16 250 22 28 37
    1.6 125 465 400 250 210 184 18 24 8 M16 250 22 35 62
    1.6 150 524 480 285 240 212 22 24 8 M20 280 24 42 90
    1.0 65 310 290 185 145 122 18 20 4 M16 140 12 19 20
    1.0 80 345 310 200 160 133 18 22 8 M16 160 14 23 26
    1.0 100 374 350 220 180 158 18 22 8 M16 180 14 28 37
    1.0 125 426 400 250 210 184 18 24 8 M16 200 17 35 62
    1.0 150 487 480 285 240 212 22 24 8 M20 200 17 42 90
    0.6 200 630 600 320 280 258 18 22 8 M16 360 27 68 100
    0.6 250 743 730 375 335 312 18 24 12 M16 450 32 80 140

    Materials of Principle Parts(CB/T 3196-95 )

    Part Name Material Grade Standard
    Valve Body & Bonnet Cast Steel ZG230-450 CB 772-86
    Valve Disc Cast Tin Bronze ZQSn10-2 CB 883-83
    Valve Stem Aluminum Bronze QA19-2 GB 4429-84
    Valve Seat Cast Aluminum Bronze ZQAl9-2 CB 883-83

    Selection & Installation Key Points
    1.Selection: For seawater / fresh water only, ≤120℃. Select this marine cast steel globe valve according to pipeline size; confirm bronze internal parts for marine corrosion resistance.
    2.Installation orientation: Can be installed horizontally. Keep the valve mark of flow direction consistent with pipeline flow direction. Reserve sufficient surrounding space for adjustment and maintenance. FORBIDDEN: Do not use for throttling for long time.
    3.Sealing pair: Bronze valve disc and bronze valve seat, suitable for water medium. Avoid sand, metal debris and hard impurities scratching the sealing surface.
    4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected grade.
    5.Flow & clearance: Unidirectional flow. Isolate upstream medium by closing the front stop valve before disassembly; avoid medium leakage.
    Why this Marine Cast Steel Globe Valve
    One integrated structure: The cast steel valve body and bonnet are the main components. Rotating the handwheel drives the stem and disc to open or close the passage. Flange connection, compact structure, reliable sealing and easy operation. It is a cut-off component for marine seawater and fresh water pipeline. The internal flow channel is specially designed for ship water system. The bronze disc-seat sealing pair features good seawater corrosion resistance, long service life and good tightness. The valve can be disassembled for inspection and replacement of wearing parts, without heavy dismantling of adjacent pipelines. Wetted materials: ZG230-450 cast steel body & bonnet, ZCuSn10Zn2 cast tin bronze disc, ZCuAl9Mn2 cast aluminum bronze seat, QAl9-2 aluminum bronze stem, suitable for marine water pipeline. What it is not: a throttling component. It is only for medium cut-off; long-time throttling will cause rapid wear to the sealing surface.

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top