Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • CB/T 3656-1994 Air Marine Pressure Reducing Valve

    Overview
    This is a marine external thread air pressure reducing valve complying with CB/T3656-94: the diaphragm-type regulating structure automatically stabilizes fluctuating high compressed air to a preset outlet pressure, maintaining steady air supply for onboard pneumatic control circuits. It is widely fitted after air bottles and air compressors to protect downstream air-driven equipment from overpressure damage. One valve integrates pressure reduction and stable pressure maintenance, simplifying compressed air piping layout and avoiding pressure surge risks for sensitive pneumatic components.

    Body is silicon brass ZCuZn16Si4 as standard, bonnet is cast steel for marine compressed air service. Cast bronze and stainless steel are optional for harsh working conditions requiring superior corrosion resistance. The sealing pair is precisely matched for reliable tightness under compressed air medium; sealing elements follow the medium: NBR/EPDM for general compressed air, PTFE for special service. Fasteners are carbon steel or stainless steel on request.
    Design, materials, testing and marking follow CB/T3656-94, with strength, tightness, wall thickness and dimensional tolerances referenced to related marine piping standards. Every casting batch keeps test specimens stamped with the heat number and retained for traceability. Every single unit is pressure-tested and inspected before shipment. Full test clauses, tolerances and weights are listed in the tables below.
    Basic Sructure of CB/T 3656-1994 Air Marine Pressure Reducing Valve

                                                                      Basic parameters (CB/T 3656-1994)

    Nominal Diameter

    mm

    Inlet Working Pressure P₁

    MPa

    Inlet DN₁ Outlet DN₂ 3.0 1.0
    Outlet Reduced Pressure P₂

    MPa

    15 20 1.0~0.7 <0.7~0.2 0.4~0.05
    20 25 1.0~0.7 <0.7~0.2 0.4~0.05
    25 32 1.0~0.7 <0.7~0.2 0.4~0.05

    Working Principle
    This valve is a direct-acting diaphragm pressure reducing valve. It balances the outlet medium pressure against the force of the adjusting spring. When the outlet pressure changes, the diaphragm senses the pressure difference and drives the valve disc to adjust the opening, automatically changing the throttling area to stabilize the downstream compressed air pressure.                                                                                                     
    Pressure grading of Air Marine Pressure Reducing Valve
    (CB/T 3656-1994)

    Pressure Grade Inlet Pressure P₁

    MPa

    Outlet Pressure P₂

    MPa

    A 3.0 1.0~0.7
    B 3.0 <0.7~0.2
    C 1.0 0.4~0.05

                                                    Basic Dimensions of Air Marine Pressure Reducing Valve (CB/T 3656-1994)

    Nominal Diameter Overall Dimension External Thread Connection Dimension

    Weight

    kg

    Inlet DN₁ Outlet DN₂ L H h Inlet Outlet
    D₁ D₂ D₃ l₁ l₂ D₄ D₅ D₆ l₃ l₄
    15 20 140 312 103 M36×2 33 22 22 5 M39×2 36 25 23 5 6.57
    20 25 229 390 123 M39×2 36 25 23 5 M48×2 45 32 26 6 22.3
    25 32 229 390 123 M48×2 45 32 26 6 M56×2 53 38 28 6 27.3

                                                                              Materials of Principle Parts (CB/T 3656-1994)

    Part Name Material
    Name Grade Standard No.
    Valve Body Silicon Brass ZCuZn16Si4 CB 883-83
    Valve Disc Cast Steel ZG230-450 CB 772-86
    Spring Spring Steel Wire 60Si2MnA GB 1222-84
    Diaphragm Oil-resistant Fabric-reinforced Rubber — —

    Selection & Installation Key Points
    1.Selection: For compressed air only, ≤80℃, max inlet pressure 3.0MPa. Select this marine air pressure reducing valve according to pipeline size; confirm silicon brass material for marine corrosion resistance.
    2.Installation orientation: Can be installed horizontally or vertically. Keep the valve mark of airflow direction consistent with pipeline flow direction. Reserve sufficient surrounding space for adjustment and maintenance. FORBIDDEN: Do not use for flow regulation or throttling beyond the calibrated pressure range.
    3.Sealing pair: Oil-resistant fabric-reinforced rubber diaphragm paired with valve disc, suitable for compressed air medium. Avoid dust, metal debris and hard impurities scratching the sealing surface.
    4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected grade.
    5.Flow & clearance: Unidirectional flow from high-pressure inlet to low-pressure outlet. Isolate upstream medium by closing the front stop valve before disassembly; avoid air leakage.
    Why this Air Marine Pressure Reducing Valve
    One integrated structure: The silicon brass valve body is the main component. Adjusting spring drives diaphragm movement to stabilize outlet pressure automatically.
    External thread connection, compact structure, stable pressure regulation and reliable sealing. It is a pressure reducing & isolation component for marine compressed air pipeline. The internal flow channel is specially designed for ship air system, with smooth flow passage and low pressure loss. The rubber diaphragm sealing pair features stable pressure-sensing performance, long service life and good tightness. The valve can be disassembled for inspection and replacement of diaphragm, spring and wearing parts, without heavy dismantling of adjacent pipelines. Wetted materials: ZCuZn16Si4 silicon brass body, cast steel valve disc, 60Si2MnA spring, oil-resistant fabric-reinforced rubber diaphragm, suitable for marine compressed air pipeline. What it is not: a shut-off valve or throttling component. It is only for compressed air pressure reduction; hard particles will cause rapid wear to the diaphragm and sealing surface.

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top