Overview
This is a Marine High Pressure Threaded Ball Valve complying with CB/T 3191-1992, widely used on board marine piping systems for hydraulic oil, compressed air and CO₂. It adopts external thread connection. Rotate the lever handle 90° for quick cut-off. The ball and PTFE seat sealing structure delivers reliable tightness and easy maintenance. Compact square body, quick operation and high pressure resistance adapt to harsh marine engine room environment. It is only for shut-off service. Suitable for ship high-pressure service piping, tested in accordance with GB/T 600.
Basic Sructure of CB T3191-1992 High Pressure Ball Valve Type A

Basic parameters(CB T3191-1992)
| Type | Nominal Pressure PN (MPa) | Nominal Diameter DN (mm) | Applicable Medium | Working Temperature | Installation |
|---|---|---|---|---|---|
| A | 6.4, 10.0 |
10~32 |
Air, Carbon dioxide, Hydraulic oil |
-20℃ ~ +80℃ |
Horizontal / Vertical |
| B | 16.0, 20.0 | ||||
| C | 32.0 | ||||
| D | 20.0 | 40, 50, 80 |
Working Principle
Rotate the lever handle by 90° to drive the ball inside the valve body. When the through-hole of the ball aligns with the pipeline passage, the valve opens and the medium flows through; when the through-hole is perpendicular to the passage, the valve closes to cut off the medium. PTFE seats provide sealing between the ball and valve body. It features rapid on-off action, low flow resistance and reliable sealing performance, suitable for on-off control of high-pressure media.
Basic Dimensions of CB T3191-1992 High Pressure Ball Valve Type A
| Nominal Pressure (MPa) | Nominal Diameter DN | Overall Dimensions | Thread Connection Dimensions | Weight (kg) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| L | L₁ | L₃ | H | D | L₂ | f | D₁ | D₂ | |||
6.410.0 |
10 | 88 | 37 | 100 | 52 | M27×1.5 | 19 | 3 | 24.8 | 14 | 0.81 |
| 15 | 115 | 50 | 125 | 56 | M36×2 | 26 | 4 | 33.0 | 22 | 1.37 | |
| 20 | 138 | 61 | 130 | 60 | M39×2 | 27 | 36.0 | 25 | 2.12 | ||
| 25 | 148 | 63 | 145 | 64 | M48×2 | 30 | 45.0 | 32 | 3.07 | ||
| 32 | 168 | 73 | 160 | 75 | M56×2 | 32 | 53.0 | 38 | 4.50 | ||
Materials of Principle Parts(CB T3191-1992)
| Part Name | Material | ||
|---|---|---|---|
| Name | Grade | Standard No. | |
| Valve body, Connector, Flange | Quality Carbon Steel | 35 | GB 699-88 |
| Ball, Stem | Stainless Steel | 2Cr13 | GB 1220-84 |
| Seal Ring | Nylon | 66 | — |
| Lever Handle | Ordinary Carbon Steel | Q235 A·F | GB 700-88 |
Selection & Installation Key Points
1.Selection: For air, CO₂ and hydraulic oil, PN up to 32.0 MPa. Complies with CB/T standard for marine high-pressure external thread ball valve. Select according to pipeline size and working pressure class; confirm material combination for anti-fatigue and pressure resistance.
2.Installation orientation: Can be installed horizontally or vertically. Keep the flow direction mark consistent with pipeline flow direction. Reserve sufficient surrounding space for handle operation and maintenance. FORBIDDEN: Do not use for throttling for long time.
3.Sealing pair: PTFE seat matched with 2Cr13 ball, suitable for oil and gas medium. Avoid metal chips and hard impurities scratching the sealing surface.
4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected class. This valve adapts to working condition from -20℃ to +80℃.
5.Flow & clearance: Bidirectional flow. It can cut off flow manually by rotating the lever handle 90°. Isolate upstream medium by closing the front stop valve before disassembly; avoid medium leakage.
Why this Product
One integrated structure: The carbon steel valve body and 2Cr13 ball are the main components. Rotating the lever handle drives the ball to open or close the passage. External thread connection, compact block structure, low flow resistance, reliable sealing and quick on-off action. It is a cut-off component for marine hydraulic, compressed air and CO₂ pipelines of various vessels. The internal flow channel is specially designed for ship high-pressure service system. The PTFE sealing pair features stable sealing performance, good wear resistance, long service life and good tightness. The valve can be disassembled for inspection and replacement of wearing parts, without heavy dismantling of adjacent pipelines. Wetted materials: 35# carbon steel body & connector, 2Cr13 stainless steel ball and stem, nylon 66 seal ring. What it is not: a throttling component. It is only for medium cut-off; long-time throttling will damage the sealing surface and shorten service life.