Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • CB/T422-93 Sight Glass Type J/JS

    Overview
    This is a flanged marine sight glass (flow observer): the top sight window allows direct visual inspection of flowing medium, while the full-bore straight passage keeps flow resistance low. It is specified for fresh water, seawater, lube oil, fuel oil and cooling circuits in ship piping systems. One fitting replaces a short pipe section plus a separate inspection point, so you add only one flanged joint and save layout space — a benefit that matters on crowded engine room and pump room horizontal runs.
    Body and cover are cast HT200 gray cast iron as standard, supplied with epoxy paint for general fresh water, lube oil and air lines. Ductile iron QT450, cast carbon steel WCB, tin bronze ZCuSn10Zn2 and CF8 / CF8M stainless steel are optional where seawater, erosion-corrosion or higher pressure demand better strength and chloride resistance. The sight window is tempered borosilicate glass, selected for transparency and thermal shock resistance; sealing elements follow the medium: NBR / EPDM for water and oil, PTFE for chemical and higher-temperature service. Fasteners are carbon steel or stainless steel on request.
    Design, materials, testing and marking follow CB/T 422‑93, with strength, tightness, wall thickness and dimensional tolerances referenced to related marine piping standards. Every casting batch keeps test specimens stamped with the heat number and retained for traceability. Every single unit is pressure-tested and inspected before shipment. Full test clauses, tolerances and weights are listed in the tables below.

    Basic Sructure of CB/T422-93 Sight Glass Type J/JS

                                                                    Basic parameters(CB/T422-93)

    Type Nominal Pressure PN (MPa) Nominal Diameter DN (mm) Applicable Medium Max. Working Temperature (℃) Flange Standard Installation
    J type 0.4 40~50 Seawater, fresh water, oil (excluding heavy fuel oil) 120 GB 569 Horizontal installation, sight glass upward
    0.25 65~100
    JS type 0.4 20~50 GB 2501
    0.25 65~200
    T type, TS type 0.1 25~200 Water and oil for overflow pipelines 70 T:GB 569

    TS:GB 2501

    Horizontal installation, sight glass upward

    Working Principle
    The flow sight glass is a straight-through visual monitoring component with no moving actuating parts. The medium flows in through one flange, passes through the full-bore cavity and flows out from the other flange. A transparent sight plate is fitted on the top. Operators can directly observe the internal flow condition through the sight window to check flow status, no-flow condition, air bubbles or impurities. It only provides a visual viewing channel. It will not change medium pressure or flow rate and has no shut-off function.
    Basic Dimensions of J-Type Flow Sight Glass(CB/T422-93)

    Nominal Pressure PN (MPa) Nominal Diameter DN Overall Dimension Wall Thickness δ Flange Bolt Glass Thickness Weight (kg)
    H d₁ D D₁ D₂ d₀ b n Th
                                                  0.4 40 160 40 8 125 93 74 15 16 6 M14 6 5.6
    50 164 50 8 135 103 84 15 16 6 M14 6 6.3
                                       

    0.25

    65 196 65 9 155 123 104 15 15 8 M14 8 11.3
    80 220 80 9 170 138 118 15 15 8 M14 8 13.1
    100 250 100 10 190 158 138 15 15 8 M14 8 16.6

                                                       Basic Dimensions of JS-Type Flow Sight Glass(CB/T422-93)

    Nominal Pressure PN (MPa) Nominal Diameter DN Overall Dimension Wall Thickness δ Flange Bolt Glass Thickness Weight (kg)
    H d₁ D D₁ D₂ d₀ b n Th
                                                                                                                                                                                                0.4 20 110 20 7 90 65 50 11 14 4 M10 6 0.95
    25 140 25 7 100 75 60 11 14 4 M10 6 1.43
    32 140 32 7 120 90 70 14 16 4 M12 6 4.64
    40 160 40 8 130 100 80 14 16 4 M12 6 6.22
    50 164 50 8 140 110 90 14 16 4 M12 6 6.95
                                                                                                                                                                                                                                                                                                      0.25 65 196 65 9 160 130 110 18 18 8 M16 8 12.11
    80 220 80 9 190 150 128 18 18 8 M16 8 14.14
    100 250 100 10 210 170 148 18 20 8 M16 10 18.41
    125 280 125 10 240 200 178 18 20 8 M16 10 25.30
    150 310 150 10 265 225 202 18 20 8 M16 10 29.34
    175 338 175 11 295 255 232 18 22 8 M16 12 30.20
    200 370 200 11 320 280 258 18 22 8 M16 12 31.25

                                                                                Materials of Principle Parts(CB/T422-93)

    Part Name Material
    Name Grade Standard No.
    Body Cast Iron HT200 GB 9439-88
    Cover Plate Carbon Steel Q235-A GB 700-88
    Sight Plate ¹) Ordinary Glass — —
    Threaded Cap Cast Tin Bronze ZQSn10-2 CB 883-83
    Sight Tube Acrylic (Polymethyl Methacrylate) — GB 7134-86

    Selection & Installation Key Points

    1.Selection: For liquid only (fresh water, seawater, lube oil, oil excluding heavy fuel oil), ≤120℃ for J/JS type and ≤70℃ for T/TS type. Select sight glass type according to medium, pressure and flow rate; confirm material option for corrosion resistance.
    2.Installation orientation: Shall be installed horizontally on pipelines with sight window facing upward. Reserve sufficient surrounding space for inspection and glass replacement. FORBIDDEN: Do not use for pressure bearing, flow regulation or throttling.
    3.Sight plate: Tempered borosilicate glass, suitable for clean liquid without sharp hard solid particles. Avoid impact, scratch and thermal shock to the glass.
    4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects glass safety; keep operating pressure and temperature below the rated value of selected type.
    5.Flow & clearance: Bidirectional flow, no flow direction restriction. Isolate upstream and downstream media by isolating valves before disassembly; avoid impurities impacting the sight glass.
    Why this sight glass
    One integrated structure: the straight full-bore body is the main component. The top sight window allows direct visual observation of liquid flow condition inside the pipeline. One flange connection, simple structure, fewer spare parts. It is a passive visual component with no flow cut-off function. The full-bore straight passage brings low flow resistance and will not interfere with medium delivery. The compact structure brings easy installation and maintenance. The sight glass can be disassembled for glass inspection and replacement, with direct access to the sight plate; no heavy dismantling of adjacent pipelines. Wetted materials are optional on order: cast iron HT200, cast bronze or stainless steel for body, tempered borosilicate sight glass, rubber or PTFE gasket, suitable for fresh water, seawater, lube oil and overflow oil circuit.
    What it is not: a shut-off valve or regulating valve. It is only for flow observation; it cannot bear excessive pressure or be used for throttling, and sharp particles will cause rapid damage to the sight plate.

    Related Products

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top