Application
Dredging equipment is widely used in waterway desilting, port expansion, land reclamation, river & lake remediation, reservoir cleaning and sand mining projects. It consists of dredging main units as well as complete dredging pipelines and wear spare parts. The whole system realizes cutting, suction, transportation and discharge of underwater silt, clay, sand and gravel. We supply all kinds of dredging pipes & wear-resistant accessories. Custom sizes are available for CSD, TSHD and more. It can be matched with positioning winches, windlasses and other marine deck machinery for coastal, river and lake operations.
Hisea Marine supplies a complete range of dredging equipment for cutter suction dredgers (CSD), trailing suction hopper dredgers (TSHD) and dredging pipeline projects. Our product portfolio covers dredging rubber hoses, hydraulic gate valves, ball joints, floaters and HDPE pipes, cutter teeth, and other dredging components—all engineered for abrasive slurry containing sand, gravel, silt and rock particles.
Core product range
|
|
|
|
|
|
|
|
🔹 Dredging Rubber Hose
Floating and non-floating discharge hoses for slurry transport. Inside diameter from DN200 to DN1300, working pressure 4–45 bar, with wear-resistant natural/synthetic rubber lining and spiral steel wire reinforcement. Suitable for CSD discharge lines, TSHD shore connections and floating pipelines.
🔹 Dredging Gate Valve
Hydraulic-driven gate valves for dredging pipeline on/off control. DN300–DN1400, pressure ratings up to PN25, with high-strength carbon steel body, wear-resistant stainless steel gate and reinforced rubber seal. Designed for slurry lines, suction/discharge pipelines and bypass systems.
🔹 Dredging Ball Joint
Flexible pipe connectors for dredging pipelines, allowing angular deflection and reducing stress at pipe joints. Available in various diameters and pressure ratings, with wear-resistant lining and sealed joint construction. Suitable for floating and submerged pipeline sections.
🔹 Dredging Floater & PE Pipe
HDPE dredge pipes and buoyancy floaters for floating discharge lines. UV-resistant, seawater-resistant and designed for long-term marine exposure. Floaters can be matched to pipe diameter and required buoyancy.
🔹 Dredging Cutter Teeth
Cutter teeth for CSD cutter heads and dredging wheels. Available in flared chisel, narrow chisel and pick point profiles for peat, sand, firm clay and rock. Manufactured with wear-resistant alloy and optional tungsten carbide inserts; IHC-compatible and OEM options available.
🔹 Other Dredging Components
Dredge pumps, cutter heads, suction mouths, wear plates, pipeline fittings and other dredger spare parts. Custom fabrication and reverse-engineering support available for obsolete or non-standard components.
Technical Specifications Overview
The table below shows representative ranges. Custom diameters, pressure ratings, materials and end connections are available on request.
| Product | Typical Range | Key Material / Standard |
| Dredging Rubber Hose | DN200–DN1300; 0° to 45° | Wear-resistant rubber; spiral steel wire; ISO 28017 where applicable |
| Dredging Gate Valve | DN300–DN1400; up to PN25 | Carbon steel body; stainless steel gate; NBR/NR seal; hydraulic actuation |
| Dredging Ball Joint | DN200–DN1200+; pressure per line design | Wear-resistant lining; sealed joint; custom flange ends |
| Dredging Floater & PE Pipe | HDPE pipe per DN; floaters matched to buoyancy requirement | UV-resistant HDPE; closed-cell foam or rotationally moulded floater |
| Dredging Cutter Teeth | Flared chisel / narrow chisel / pick point | Wear-resistant alloy; optional tungsten carbide insert; IHC-compatible and OEM options available |
| Other Components | Per drawing or sample | Material and dimensional report supplied |
Frequently Asked Questions
What information is needed to select a dredging rubber hose?
Provide inside diameter, working pressure, slurry type (sand/gravel/silt/rock), floating or non-floating installation, and end connection standard. With these inputs, we can confirm the hose construction, lining material, reinforcement layers and pressure rating.
How do I choose between floating and non-floating dredge hose?
Floating hose is used where the pipeline runs on the water surface and requires buoyancy; non-floating hose is installed between steel pipes or in submerged/deck pipelines where flexibility rather than buoyancy is the main requirement. The connection and support arrangement differ, so the installation method should be confirmed before quotation.
What is the typical lead time for dredging equipment?
Lead time depends on product type and customisation. Standard rubber hoses and cutter teeth are typically shorter lead time; large gate valves, custom ball joints and HDPE pipeline packages require drawing approval and production scheduling. Provide your project schedule at enquiry stage so we can confirm a realistic delivery date.
Can you supply components compatible with IHC or other OEM dredgers?
Yes, for cutter teeth and selected wear parts we can supply IHC-compatible profiles and OEM-equivalent components. For custom or obsolete parts, provide a drawing or sample for reverse-engineering and material confirmation.





