Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • n-type-pool-anchor

    N type pool anchor

    What Is an N Type Pool Anchor?

    N Type Pool Anchor is a stockless high holding power (HHP) anchor designed to fit modern anchor pockets. Its smooth, sharp flukes work well in mud, sand, and mixed seabed conditions, making it a common choice for bow anchors on large commercial vessels and as positioning anchors on working ships.

    Key Features of the N Type Pool Anchor

    Stockless design — no protruding stock, suitable for bow pockets and hawse pipes.

    High holding power (HHP) — about twice the holding capacity of a conventional anchor of the same weight in full-scale trials.

    Widely used — performs in mud, sand, and mixed ground.

    Materials and Specifications

    N Type Pool Anchors are typically supplied in cast steel and steel plate, with black painting or hot-dip galvanizing finishes. For yacht use material can be stainless steel 316L. Weight ranges commonly cover 180 kgs to 8,325 kgs.

    N Type Pool Anchor Drawing and Specification

    n-type-pool-anchor-drawing

    Nominal Weight (kg) A

    (mm)

    B

    (mm)

    C

    (mm)

    D

    (mm)

    E

    (mm)

    F

    (mm)

    180 795 675 615 155 940 385
    200 825 700 640 160 978 400
    240 880 745 680 175 1040 425
    280 925 780 715 180 1092 450
    320 964 820 745 190 1140 470
    360 1005 855 780 195 1190 490
    400 1040 885 805 205 1230 505
    440 1074 910 830 210 1270 520
    480 1105 940 855 215 1305 535
    520 1133 960 875 220 1340 550
    560 1165 985 900 230 1375 565
    600 1190 1010 920 235 1410 580
    640 1216 1035 940 240 1440 590
    720 1265 1075 978 250 1495 615
    800 1313 1115 1015 255 1550 635
    900 1365 1160 1055 270 1615 665
    1000 1410 1200 1090 275 1670 670
    1250 1520 1290 1175 300 1800 740
    1500 1615 1370 1250 315 1910 785
    1750 1705 1445 1320 335 2015 830
    2250 1850 1570 1430 360 2185 900
    2500 1920 1630 1485 370 2265 920
    2655 1954 1664 1516 372 2312 925
    2835 1996 1700 1550 380 2364 945
    3040 2042 1735 1585 390 2418 968
    3240 2086 1773 1620 398 2471 988
    3445 2129 1809 1653 406 2522 1009
    3670 2174 1847 1689 415 2575 1030
    3940 2226 1892 1730 425 2637 1055
    4210 2276 1934 1768 434 2696 1078
    4500 2328 1978 1808 444 2757 1103
    4840 2385 2026 1852 455 2824 1130
    5175 2439 2072 1894 465 2889 1155
    5515 2491 2116 1934 475 2950 1180
    5850 2541 2159 1973 485 3009 1204
    6225 2594 2204 2014 495 3072 1229
    6525 2635 2239 2046 503 3121 1248
    6975 2695 2290 2092 514 3190 1276
    7425 2751 2337 2136 525 3258 1303
    7875 2805 2384 2178 535 3323 1329
    8325 2858 2428 2219 545 3385 1354
    For more weights please contact us for details

    Fully Balanced vs Standard N Type Pool Anchor — What Is the Difference?

    Fully Balanced Type

    A fully balanced N Type Pool Anchor keeps its flukes in an upright position while the anchor is being lifted. Because the center of gravity sits below the pivot axis, the flukes return to vertical automatically, ensuring the anchor slides smoothly into the anchor pocket without getting stuck.

    Standard / Unbalanced Type

    A standard (unbalanced) N Type Pool Anchor does not keep its flukes upright during lifting. The flukes may tilt outward as the anchor comes up, which can cause the anchor to catch on the outside of the pocket or hull recess.

    How to Choose the Right N Type Pool Anchor

    If the vessel has a recessed anchor pocket → specify fully balanced to ensure smooth stowage and avoid jamming.

    If the anchor is for a large commercial ship → the fully balanced HHP Pool N is the standard specification for bow anchor systems.

    If the installation is light-duty or temporary → a standard version may be sufficient, but pocket fit should be checked carefully.

    If the vessel is a yacht or cruise ship → stainless-steel fully balanced versions offer both reliable stowage and a clean appearance.

    N Type Fully Balanced Pool Anchor Drawing and Specification

    n-type-fully-balanced-pool-anchor-drawing

    Nominal Weight

    (kg)

    A

    (mm)

    B

    (mm)

    C

    (mm)

    D

    (mm)

    E

    (mm)

    F

    (mm)

    200 885 825 700 546 236 400
    280 1008 925 780 622 269 450
    360 1096 1005 855 677 292 490
    480 1186 1105 940 728 314 535
    600 1300 1190 1010 802 347 580
    765 1410 1290 1096 870 375 610
    1000 1526 1395 1185 942 404 660
    1080 1580 1446 1230 975 421 685
    1195 1636 1485 1270 1010 436 708
    1305 1680 1541 1308 1037 464 754
    1440 1738 1592 1352 1073 464 754
    1575 1769 1640 1386 1092 472 777
    1710 1840 1686 1455 1137 491 798
    1845 1890 1729 1469 1168 504 819
    1980 1935 1770 1504 1195 516 836
    2140 1986 1816 1543 1226 530 860
    2295 2030 1860 1580 1254 540 880
    2655 2140 1954 1684 1322 566 926
    2835 2188 1996 1700 1351 580 945
    3000 2238 2042 1736 1382 592 968
    3240 2287 2086 1773 1412 605 988
    3940 2442 2226 1892 1508 646 1055
    4500 2553 2328 1976 1576 675 1103
    5175 2675 2439 2072 1651 708 1155
    5515 2730 2491 2116 1686 722 1180
    5850 2786 2541 2159 1720 737 1204
    6225 2838 2594 2204 1750 756 1229
    6525 2880 2635 2239 1780 768 1248
    6975 2948 2695 2290 1820 786 1276
    7425 3010 2760 2338 1858 802 1303
    7875 3069 2805 2384 1895 818 1329
    8775 3180 2908 2471 1964 848 1376
    For more weights please contact us for details

    Related Products

    cbt-4135-2011-light-weight-anchor

    CB/T 4135-2011 Light Weight Anchor

    What Is CB/T 4135-2011 Light Weight Anchor The CB/T 4135-2011 light weight anchor is a Chinese standard high holding power (HHP) marine anchor. This standard specifies classification, technical requirements, test

    MK3-MK5-MK6-Type-Anchor

    MK3 MK5 MK6 Type Anchor

    What Are MK3 MK5 MK6 Type Anchor? MK3 MK5 MK6 type anchors are large drag anchors widely used for offshore permanent and temporary mooring. These anchor designs were made famous

    tw-type-pool-anchor

    TW Type Pool Anchor

    What Is a TW Type Pool Anchor? The TW type pool anchor is a light high holding power (HHP) anchor with two flat flukes and no stock. It is built

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top