Marine Pump for Shipboard Duty
Hi-Sea manufactures marine pump for shipyards, shipowners and vessel management companies. From bilge dewatering and ballast transfer to seawater cooling, cargo oil and lube oil service, each pump is selected by duty point—not by catalogue number alone.
Our marine pump range covers centrifugal pump, gear pump, twin/triple screw pump, ejector pump, hand pump and piston pump, with materials and seal arrangements matched to seawater, fuel oil, lube oil and cargo duties.
Applications
Bilge Pump
For bilge dewatering and emergency drainage, with self-priming capability and solids handling specified to vessel and class requirements.
Ballast Pump
For ballast transfer and deballasting, with large capacity, low NPSHr and compatibility with ballast water treatment systems.
Sea Water Cooling Pump
For engine and heat exchanger cooling, with bronze, 316 stainless steel or duplex stainless steel options for seawater service.
Cargo Oil Pump (COP)
For crude oil, petroleum product and liquid chemical cargo transfer, with pump type and drive selected by capacity, head, viscosity and pump-room arrangement.
Fuel Oil Pump
For fuel oil transfer, supply and booster duties, with gear or screw pump options for high-viscosity fuel oil and remote shutdown arrangements per class requirements.
Lube Oil Pump
For main lube oil circulation, prelubrication and scavenge duties, with continuous-duty reliability and automatic standby start on low lube oil pressure.
Marine Fire Pump / Emergency Fire Pump
For main and emergency firefighting duties, with independently driven emergency fire pump arrangements, self-priming capability and reliable starting performance.
Deck Wash Pump
For deck washing and general seawater service, with corrosion-resistant materials and pressure/capacity combinations matched to vessel operating profile.
Marine Pump Product Range
| Pump Type | Typical Marine Duty |
| Centrifugal Pump | Ballast, seawater cooling, fire, deck wash, general service |
| Gear Pump | Fuel oil transfer, fuel oil supply, lube oil service |
| Screw Pump | Fuel oil, lube oil, cargo oil, high-viscosity transfer |
| Ejector Pump | Bilge drainage, cargo tank stripping, vacuum extraction |
| Hand Pump | Emergency drainage, local transfer where power is unavailable |
| Piston Pump | High-pressure oil transfer and special marine duties |
Engineered for the Marine Environment
Each marine pump is specified around the actual operating condition:
♦ Capacity and head at the rated duty point
♦ NPSHr matched against available NPSHa to reduce cavitation risk
♦ Materials—cat iron,brass,bronze,316 stainless steel or duplex stainless steel
♦ Seal arrangement—mechanical seal and gland packing
♦ Drive options—electric motor and diesel engine
♦ Documentation—drawings, test reports, O&M manual
Class Approval and Documentation
Our marine pump can be supplied with documentation and type approval arrangements according to project requirements. Please confirm the required class society—ABS, DNV, LR, BV, NK or CCS—at the enquiry stage.
Custom and Engineered Solutions
When a standard catalogue pump does not match the vessel’s duty point, we specify the marine pump around your application: fluid, capacity, head, temperature, viscosity, NPSH, installation space and class requirement.
Send Your Marine Pump Duty Point
To help us specify the right marine pump, please provide:
Fluid:seawater / fuel oil / lube oil / cargo oil / other
Capacity:m³/h
Head:m
Temperature:°C
Viscosity:cSt (if applicable)
NPSH available:m (if known)
Class requirement:ABS / DNV / LR / BV / NK / CCS
Vessel type and installation location
Marine Pump in factory






