ASTM A105 carbon steel spectacle blind flange

ASTM A105 carbon steel spectacle blind flange

ASTM A105 carbon steel spectacle blind flange

ASTM A105 carbon steel spectacle blind flange introduction

ASTM A105 carbon steel spectacle blind flange is often made from two metal discs that are attached to each other by a small section of steel. One end of the blind will have an opening to allow flow through the pipe during operation and the other end is solid to block flow during maintenance. It is generally installed as a permanent device to separate process piping systems.

ASTM A105 carbon steel spectacle blind flange specification

Type Spectacle blind flange; figure 8 blind
Size 10mm to 2000mm(or 1/2 inch – 24 inch)
Class 150, 300, 600
Surface treatment Antirust oil, yellow, epoxy coating, nylon surface, hot galvanized, electrical galvanized
Certificate ABS, CCS, DNV, GL, BV, LR, KR, etc.
Application Petroleum, chemical, food industry, marine, etc.


ASTM A105 carbon steel spectacle blind flange drawing and dimensions(refer to the catalogue)

ASTM A105 carbon steel spectacle blind flange show

ASTM-A105-spectacle-blind-flange-show.jpg

ASTM A105 carbon steel spectacle blind flange processing

ASTM-A105-spectacle-blind-flange-processing.jpg

ASTM A105 carbon steel spectacle blind flange workshop

ASTM-A105-spectacle-blind-flange-workshop.jpg

ASTM A105 carbon steel spectacle blind flange cooperation

Feel free to contact us for standard ASTM A105 carbon steel spectacle flange. Send us enquiries or drawings for special designs.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification