Overview
The marine external thread bronze angle throttle valve conforming to CB/T315‑1993 is a manually operated 90° angle regulating fitting built for flow throttling and shut‑off duty on ship auxiliary piping systems handling compressed air, lubricating oil and steam with temperature up to 250℃. All variants share one angle‑pattern valve body design with male thread end connections. The range covers PN4.0 pressure rating, with standard sizes DN10, DN15, DN20 and DN25 available. Manual handwheel operation, screwed bonnet and integral throttling plug deliver dual performance: the handwheel can provide fine flow adjustment for process throttling or positively close the valve for isolation during inspection and maintenance. Material selection follows the medium, not the price list. Body, plug and stem are normally cast aluminium bronze; the sealing structure maintains stable throttling characteristics without premature sticking under fluctuating pressure and temperature. Gaskets are heat‑resistant composite material for steam and oil service. Bronze construction provides reliable mechanical strength and good seawater corrosion resistance under deck operating conditions. Every valve is designed, manufactured and accepted against CB/T315‑1993, with strength, tightness, wall thickness, dimensional and geometric tolerances referenced to GB/T 600‑2023. Mass is controlled within agreed tolerance, castings are traceable by heat number for a minimum of three years, and marking follows GB/T 3032. Clause‑by‑clause verification data is listed in the compliance section below.
Basic Sructure of CB/T315 Bronze Angle Throttle Valve

Basic parameters(CB/T315-1993)
| DN (mm) | PN (MPa) | Applicable Media | Temp. | Connection | Body Material |
|---|---|---|---|---|---|
| 10 | 4.0 | Compressed air, lubricating oil, steam | ≤250℃ | Male thread | Cast aluminium bronze ZQAl9‑2 |
| 15 | 4.0 | Compressed air, lubricating oil, steam | ≤250℃ | Male thread | Cast aluminium bronze ZQAl9‑2 |
| 20 | 4.0 | Compressed air, lubricating oil, steam | ≤250℃ | Male thread | Cast aluminium bronze ZQAl9‑2 |
| 25 | 4.0 | Compressed air, lubricating oil, steam | ≤250℃ | Male thread | Cast aluminium bronze ZQAl9‑2 |
Working Principle
This CB/T315‑1993 marine external thread bronze angle throttle valve adopts a plug‑type throttling structure. Rotating the handwheel drives the stem and throttling plug to move linearly, changing the flow area between the plug and valve seat. It realizes continuous adjustment of flow rate and medium pressure for throttling service. When the plug is fully pressed down against the seat, the passage can be completely closed to cut off the medium.It is designed mainly for throttling regulation, not suitable for long‑term tight shut‑off duty. Stable throttling performance can be maintained under compressed air, lubricating oil and steam conditions within the rated pressure and temperature range.
Basic Dimensions of Bronze Angle Throttle Valve (unit:mm/kg)
| DN | L | H₁ | H | Wall thickness δ | Thread D | Thread length l | d₁ | d₂ | Handwheel D₀ | S | Lift m≈ | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 53 | 49 | 139 | 6 | M27×1.5 | 16 | 24.8 | 14 | 80 | 8 | 10 | 1.18 |
| 15 | 58 | 58 | 148 | M36×2 | 22 | 33 | 22 | 80 | 8 | 13 | 1.40 | |
| 20 | 64 | 64 | 156 | M39×2 | 23 | 36 | 25 | 100 | 9 | 15 | 1.92 | |
| 25 | 72 | 72 | 176 | M48×2 | 26 | 45 | 32 | 120 | 11 | 18 | 2.67 |
Material of Construction(CB/T315-1993)
| Part Name | Material Name | Grade | Standard |
|---|---|---|---|
| Valve body, bonnet | Cast aluminium bronze | ZQAl9‑2 | CB883‑83 |
| Valve stem, disc | Aluminium bronze | QAl9‑2 | GB4429‑84 |
Selection & Installation Key Points
1.Selection: For compressed air, lubricating oil and steam, max working temperature up to 250℃. Complies with CB/T315‑1993 Marine External Thread Bronze Angle Throttle Valve standard. Select according to required flow regulation range and pipe size; confirm aluminium bronze wetted parts for good marine corrosion resistance.
2.Installation orientation: Can be installed on horizontal or vertical auxiliary pipelines. Keep handwheel easy to access for operation and adjustment. Reserve sufficient surrounding space for inspection and maintenance. FORBIDDEN: Do not use it as a long‑term tight shut‑off valve; it is designed primarily for throttling regulation, not for bubble‑tight isolation.
3.Sealing pair: Metal‑to‑metal matching between throttling plug and valve seat, suitable for oil, compressed air and steam service. Avoid welding slag, metal chips and hard impurities sticking on the sealing surface to prevent scratch and unstable throttling performance.
4.Temp-pressure: Rated PN4.0 applies within the allowable temperature range. Temperature fluctuation will affect throttling characteristics; keep operating pressure and temperature below the rated value of selected size. This valve adapts to working temperature from -20℃ to +250℃.
5.Flow & clearance: Linear lift adjustment. Rotate handwheel to change flow area continuously for flow and pressure regulation. Close the upstream isolating valve before disassembly; release internal pressure completely before maintenance to avoid medium spray.
Why this product
One integrated angle pattern structure: The cast aluminium bronze valve body and bonnet are the main components. Internal stem and throttling plug assembly controls flow area by lifting movement, to realize continuous throttling regulation and simple shut‑off. Male thread end connection, compact structure, reliable regulation performance and easy maintenance. It is a combined throttling & shut‑off fitting for marine auxiliary piping systems of various vessels. The internal flow channel is specially designed for ship compressed air, lube oil and steam lines. Aluminium bronze wetted parts feature excellent seawater corrosion resistance, stable throttling curve and long service life.The valve can be disassembled for inspection and replacement of stem and sealing components, without heavy dismantling of adjacent pipelines.Wetted materials: ZQAl9‑2 cast aluminium bronze body & bonnet, QAl9‑2 aluminium bronze stem and disc. What it is not: A dedicated isolation valve. It is only for flow throttling adjustment; long‑term use for tight cut‑off will accelerate sealing surface wear.
