ASTM A105 carbon steel SWRF flange

ASTM A105 carbon steel SWRF flange

ASTM A105 carbon steel SWRF flange

ASTM A105 carbon steel SWRF flange introduction

ASTM A105 carbon steel SWRF flange is less readily available than slip on flange due to the fact that the bottom half of the inside diameter must be made to the same schedule as the pipe that is being used (Customer must specify the schedule needed). This ASTM A105 carbon steel SWRF flange was initially developed for use on smaller sizes of pipe at higher pressure ratings; it is more used on lower pressure temperature as well today.

ASTM A105 carbon steel SWRF flange specification

Type SWRF flange; socket weld raised face flange
NPS 1/2" - 24"
Class 150, 300, 600
Surface treatment Antirust oil, yellow, epoxy coating, nylon surface, hot galvanized, electrical galvanized
Certificate ABS, CCS, DNV, GL, BV, LR, KR, etc.
Application Petroleum, chemical, food industry, marine, etc.


ASTM A105 carbon steel SWRF flange drawing and dimensions(refer to the catalogue)

ASTM A105 carbon steel SWRF flange show

ASTM-A105-carbon-steel-SWRF-flange-show.jpg

ASTM A105 carbon steel SWRF flange forging

ASTM-A105-carbon-steel-SWRF-flange-forging.jpg

ASTM A105 carbon steel SWRF flange processing

ASTM-A105-carbon-steel-SWRF-flange-processing.jpg

ASTM A105 carbon steel SWRF flange factory

ASTM-A105-carbon-steel-SWRF-flange-factory.jpg

ASTM A105 carbon steel SWRF flange cooperation

Feel free to contact us for standard ASTM A105 carbon steel SWRF flange. Send us enquiries or drawings for special designs. We are glad to be of services to you.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification