DIN 86158 MGCH Shield power cable

DIN 86158 MGCH Shield power cable application

For fixed installations on ships and offshore-units in all locations and open deck.

The good screening qualities of the copper braid also reduce radio interferences and electrical influences to electronic installation.

The cables meet the flame test requirement for bunched cables acc. to IEC 60332-3-22 and IEEE45-18.13, and perform to the SOLAS requirements.

All cable materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on passenger ships.

DIN 86158 MGCH Shield power cable standards

CONSTRUCTION :DIN 89158, IEC 60092/353

TESTS AND MATERIAL :IEC 60092 /350-351-359

FLAME RETARDATION :IEC 60332 /1, IEC 60332 / 3 Cat A

HALOGEN CONTENT :IEC 60754 / 1 - 2

SMOKE DENSITY :IEC 61034 / 1-2 ( DIN EN 50268/1-2)

SHIELDING EFFECTIVENES :DIN EN 50147-1

WORKING TEMPERATURE :-40°C / + 90°C

MIN. BENDING RADIUS (FIXED) : 8 x (Overall Diameter)

RATED VOLTAGE : 0,6 / 1 kV TEST VOLTAGE : 3,5 kV

DIN 86158 MGCH Shield power cable construction

Conductor material	Bare copper
Conductor ﬂexibility	Stranded class 2
Insulation	HEPR
Protection	Filler or tape
Outer sheath	Polyoleﬁn
Sheath colour	Black
Halogen free	Yes
Armour type	Bare copper braid

DIN 86158 MGCH Shield power cable characteristics

Max. conductor temperature in service	85°C
Flame retardant	IEC 60332-3 Cat. A
Smoke density	IEC 61034
Gases corrosivity	No IEC 60754-2
Gases toxicity	No toxicity to IEC 60754-1
Standard	DIN VDE and IEC