J507CuP  Corrosion-resistant Steel Electrode

J507CuP Corrosion-resistant Steel Electrode

J507CuP
GB:E5015-G
AWS:
Current:Suitable for welding low-alloy steel structures of Cu-P system which can resist atmospheric corrosion and seawater corrosion, such as 16MnPNbXt, 09MnCuPTi, 08MnP, etc.

J507CuP

According with GB E5015-G


Introduction: J507CuP is a kind of low-alloy steel electrode with low-hydrogen natrium type coating. DCRP (Direct Current Reversed Polarity). All-position welding. The weld metal has excellent atmospheric corrosion-resistance and seawater corrosion-resistance. It has excellent welding performance.


Uses: Suitable for welding low-alloy steel structures of Cu-P system which can resist atmospheric corrosion and seawater corrosion, such as 16MnPNbXt, 09MnCuPTi, 08MnP, etc.


Chemical Composition of Deposited Metal (%)
Chemical Composition
C
Mn
Si
S
P
Cu
Guarantee Value
≤0.12
0.8~1.3
≤0.5
≤0.035
0.06~0.12
0.20~0.50

Mechanical Properties of Deposited Metal
Test Item
Rm(MPa)
ReL或Rp0.2(Mpa)
A(%)
KV2(J)
Guarantee Value
≥490
≥390
≥22
≥27(-30℃)
General Result
520~580
≥400
23~26
100~160

Diffusible Hydrogen Content in Deposited Metal: ≤6.0ml/100g(Glycerine Hydrogen Test)

X-ray Radiographic Inspection: ⅠDegree

Reference Current (DC+)
Electrode Diameter(mm)
φ2.5
φ3.2
φ4.0
φ5.0
Welding Current (A)
60~90
90~120
110~180
160~210

Instructions:
1.The electrodes must be baked under about 350℃ for an hour before welding, and used as soon as baking is completed.
2.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding.
3.When welding, short arc must be used and stringer bead is suitable.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification