Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • GB/T 585-2026 Type B/BS Flanged Cast Steel Stop Check Valve

    Product Overview
    The B/BS series are marine cast steel flanged stop check valves with a right-angle body that combines manual shut-off and automatic non-return protection: the handwheel isolates the line when required, while the disc closes automatically to prevent reverse flow. The B model uses CB/T 4196 flange dimensions and sealing faces, while the BS model uses GB/T 9124.1 PN flanges for integration into different marine piping layouts. Both feature cast steel bodies, stainless steel sealing faces and trim, and flanged connections, making them suitable for fresh water, lube oil, fuel oil, air and steam in ship piping systems (PN10–PN25 up to 300°C; PN40–PN63 up to 400°C, subject to pressure-temperature rating limits).
    Basic Sructure of Type B/BS Flanged Cast Steel Stop Check Valve

    Basic parameters (GB/T 585—2026)
    PN Max. working pressure (MPa) Type B — DN range Type BS — DN range Service media
    10 1.0 65 – 150 200 – 300  

    Fresh water, lubricating oil, fuel oil, air and steam not exceeding 300 °C

    16 1.6 125 – 150 65 – 300
    25 2.5 20 – 150 15 – 200
    40 4.0 65 – 100 65 – 100 Fresh water, lubricating oil, fuel oil, air and steam not exceeding 400 °C
    63 6.3 20 – 50 20 – 50
    Basic dimensions, type B, PN10 / PN16 / PN25 (GB/T 585—2026)
    PN DN L H ≈ H1 t D D1 D2 d0 b n Th. D0 S Lift  Weight (kg)
     

     

    10

    65 115 275 115 6 155 123 104 15 14 6 M14 140 12 17 13.8
    80 125 298 125 7 170 138 118 15 14 8 M14 160 14 20 18.7
    100 150 315 135 8 190 158 138 15 14 8 M14 180 14 25 25
    125 175 354 155 8 215 183 164 15 14 10 M14 200 17 32 35.1
    150 180 396 160 9 240 208 190 15 14 12 M14 200 17 38 43.4
    16 125 175 393 155 8 225 187 168 17 15 10 M16 250 22 32 46.5
    150 180 433 160 9 255 217 196 17 15 12 M16 280 24 38 58.1
     

     

     

     

     

    25

    20 75 203 75 6 95 68 48 13 11 4 M12 80 8 7 4.8
    25 80 203 80 6 105 73 56 13 12 4 M12 80 8 7 5.2
    32 85 216 85 6 115 83 64 15 13 6 M14 100 9 9 6.4
    40 90 236 90 7 125 93 74 15 13 6 M14 120 11 11 8.2
    50 95 258 95 7 135 103 84 15 13 6 M14 140 12 14 10.7
    65 115 300 115 7 170 132 110 17 15 8 M16 160 14 17 17.8
    80 125 321 125 7 185 147 126 17 16 8 M16 200 17 20 22.1
    100 150 368 135 8 205 167 146 17 16 10 M16 250 22 25 32.4
    125 175 421 155 9 240 196 172 21 19 10 M20 280 24 32 57.6
    150 200 465 175 9 270 226 200 21 20 12 M20 320 27 38 75.2
    Basic dimensions, type B, PN40 / PN63 (GB/T 585—2026)
    PN DN L H ≈ H1 t D D1 D2 D3 D4 f d0 b n Th. D0 S Lift  Weight (kg)
     

    40

    65 125 374 125 8 175 137 118 110 94 3 17 18 8 M16 250 22 17 32.3
    80 140 394 130 9 190 152 130 121 105 3 17 18 8 M16 250 22 20 35.4
    100 165 416 145 9 225 181 157 150 128 4 21 21 10 M20 280 24 25 44.3
     

     

    63

    20 80 243 85 7 105 73 58 51 35 3 13 13 6 M12 100 9 7 6.7
    25 85 253 90 7 115 83 66 58 42 3 15 15 6 M14 100 9 7 7.8
    32 90 281 95 7 125 93 74 66 50 3 15 17 6 M14 120 11 9 9.5
    40 105 310 110 7 145 107 84 76 60 3 17 19 6 M16 160 14 11 16.1
    50 110 323 115 8 155 117 96 88 72 3 17 20 6 M16 180 14 13 20.3
    Basic dimensions, type BS, PN10 / PN16 / PN25 (GB/T 585—2026)
    PN DN L H ≈ H1 t D D1 D2 d0 b n Th. D0 S Lift  Weight (kg)
     

    10

    200 275 525 275 10 340 295 268 22 24 8 M20 360 27 50 109
    250 325 608 325 11.5 395 350 320 22 26 12 M20 450 32 65 168
    300 375 671 375 13 445 400 370 22 26 12 M20 500 36 75 227
     

     

     

     

     

    16

    65 145 300 145 7 185 145 122 18 18 8 M16 160 14 17 20.6
    80 155 321 155 8 200 160 138 18 20 8 M16 200 17 20 25.6
    100 175 368 175 8 220 180 158 18 20 8 M16 250 22 25 33.3
    125 200 393 200 8 250 210 188 18 22 8 M16 250 22 32 47.8
    150 225 433 225 9 285 240 212 22 22 8 M20 280 24 38 64
    175 225 490 225 10 315 270 242 22 24 8 M20 360 27 45 92.3
    200 275 547 275 10 340 295 268 22 24 12 M20 450 32 50 122
    250 325 631 325 11.5 405 355 320 26 26 12 M24 500 36 65 182
    300 375 730 375 13 460 410 378 26 28 12 M24 560 36 75 234
     

     

     

     

     

     

     

    25

    15 90 203 90 6 95 65 47 14 16 4 M12 80 8 7 5.1
    20 95 203 95 6 105 75 58 14 18 4 M12 80 8 7 5.5
    25 100 203 100 6 115 85 68 14 18 4 M12 80 8 7 6.3
    32 105 216 105 6 140 100 78 18 18 4 M16 100 9 9 8.7
    40 115 236 115 7 150 110 88 18 18 4 M16 120 11 11 11.2
    50 125 241 125 7 165 125 102 18 20 4 M16 140 12 14 14.9
    65 145 300 145 7 185 145 122 18 22 8 M16 160 14 17 21.5
    80 155 321 155 8 200 160 138 18 24 8 M16 200 17 20 27
    100 175 368 175 8 235 190 162 22 24 8 M20 250 22 25 39.4
    125 200 420 200 9 270 220 188 26 26 8 M24 280 24 32 60.6
    150 225 465 225 9 300 250 218 26 28 8 M24 320 27 38 77.4
    200 275 610 275 11.5 360 310 278 26 30 12 M24 450 32 50 133
    Basic dimensions, type BS, PN40 / PN63 (GB/T 585—2026)
    PN DN L H ≈ H1 t D D1 D2 D3 D4 f d0 b n Th. D0 S Lift  Weight (kg)
     

    40

    65 145 374 145 8 185 145 122 110 94 3 18 22 8 M16 250 22 17 35.8
    80 155 394 155 9 200 160 138 121 105 3 18 24 8 M16 250 22 20 39.5
    100 175 416 175 9 235 190 162 150 128 3 22 24 8 M20 280 24 25 50.7
     

     

    63

    20 115 243 115 7 130 90 58 51 35 3 18 22 4 M16 100 9 7 8.3
    25 115 253 115 7 140 100 68 58 42 3 18 24 4 M16 100 9 7 10.2
    32 130 281 130 7 155 110 78 66 50 3 22 24 4 M20 120 11 9 12.5
    40 130 310 130 7 170 125 88 76 60 3 22 26 4 M20 160 14 11 20.3
    50 150 323 150 8 180 135 102 88 72 3 22 26 4 M20 180 14 13 25.6

    Dimensions in mm; weight in kg. 

    Materials of principal parts (GB/T 585—2026)
    Part Material Grade Standard
    Body, bonnet Cast steel ZG275-485 GB/T 12229—2025
    Body and bonnet seat faces Stainless steel, weld-deposited E347 GB/T 983—2012
    Disc Quality carbon steel 20 GB/T 699—2015
    Disc seat face Stainless steel, weld-deposited E410 GB/T 983—2012
    Stem Stainless steel 20Cr13 GB/T 1220—2007
    Packing — water, lube oil, air PTFE, braided F4SD JB/T 6626—2011
    Packing — fuel oil, steam Flexible graphite RSM CB/T 3589—1994
    Gasket — water, lube oil, air PTFE PTFE QB/T 4041—2010
    Gasket — fuel oil, steam Flexible graphite RSM CB/T 3589—1994
    Stud bolt Property class 6.8 6.8 GB/T 898—1988
    Nut Property class 6 6 GB/T 6170—2015
    Handwheel — type B Cast steel ZG230-450 CB/T 3530—1993
    Handwheel — type BS Ductile iron QT400-15 CB/T 3530—1993

    Selection And Compatibility
    The B/BS series are both right-angle marine cast steel stop check valves, but they are not interchangeable by DN and PN alone. Please confirm the mating flange and service conditions before ordering.
    Flange standard: B model — CB/T 4196—2011; BS model — GB/T 9124.1—2019 PN series. Check flange OD, bolt circle, bolt hole diameter/number, flange thickness and sealing face before replacement.
    PN vs. ANSI: PN10/16/25/40/63 are not equivalent to ANSI Class 150/300 or other pressure classes. Do not select by pressure class alone.
    Sealing face: Specify R (raised face) or F (flat face) at inquiry.
    Packing and gasket: P = PTFE; S = flexible graphite. For fuel oil and steam service, flexible graphite is recommended.
    Installation: Right-angle body design. Confirm flow direction and allow sufficient clearance for handwheel operation and maintenance.
    Temperature rating: For working temperatures above 100°C, verify pressure-temperature derating in accordance with GB/T 9124.1—2019.
    Testing And Certificates
    Each valve is inspected and pressure-tested before shipment to support marine project acceptance.
    Pressure testing: Shell strength and seat tightness tested in accordance with GB/T 600—2023.
    Test reports: Pressure test and dimensional inspection reports available on request.
    Material certificates: Available on request. Please specify the required certificate standard in your RFQ.
    Class society certification: CCS, ABS, DNV, LR, BV, NK, KR, etc. can be applied for on a project basis. Please confirm before order

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top