Application:
GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others
Key Materials and Features:
Cast steel(ZG230-450)
Reference Valves: GB/T586-1999 Cast Steel Check Valves
Cast steel has good ductility and impact toughness; it is not prone to immediate cracking under start-stop cycles, pressure fluctuations, or water hammer conditions, making it suitable for steam and fuel oil piping. It can be used in low- and medium-pressure saturated steam systems and high-temperature lubricating oil piping
Cast Iron(HT200)
Reference Valves: GB/T590-2008 Cast Iron Globe Valves
Suitable for seawater, freshwater, lubricating oil, fuel oil, and steam at <220°C. Cast iron has good wear resistance, shock absorption properties, and moderate mechanical properties, making it suitable for structural components subjected to pressure and vibration
Bronze(ZCuAI9Mn2,ZCuSn10Zn2)
Reference Valves: GB/T587-2008 Bronze Globe Valve
Bronze is resistant to scouring and high-velocity seawater erosion, as well as cavitation, and offers superior wear resistance. It is suitable for seawater pump outlets, hull valves, storm valves, high-velocity seawater pipelines, and subsea valves
Key Standards:
| Main Type | JIS Standard | Main Description |
| Marine Globe Valve | GB/T585-2008 | 1.0MPa-6.4MPa, Size: DN65-DN250
manual shut-off & throttling, plus automatic non-return to prevent backflow Suitable for fuel oil, lube oil, steam and compressed air |
| Marine SDNR Valve | GB/T591-2008 | 0.6-1.6MPa, Size: DN50-DN300
Type A/AS straight, B/BS angle. Flange to GB/T 569 or GB/T 2501 |
| Marine Check Valve | GB/T589-2015 | 0.6-2.5MPa, Size: DN15-DN125
Suitable for seawater, fresh water, fuel oil, lube oil and steam. Tested per GB/T 600 |
| Marine Fire Hydrant Valve | GB/T2032-93 | 1.0MPa, Size: DN40-DN65
For marine fire fighting system (sea water / fresh water), with standard fire hose coupling
|
| Marine Quick-closing Valve | GB/T5744-2008 | 0.25MPa, Size: DN20-DN150
Types A/AS straight, B/BS angle, manual wire rope remote control or pneumatic operation |
| Marine Sea Suction Valve | GB/T2029-80 | 0.4MPa, Size: DN50-DN500
Angle type for installation on ship bottom shell plate, seawater suction line for cooling & fire system |
Pressure Test:
1. Shell hydrostatic test pressure: 1.5 × PN
2. Seat tightness test pressure: 1.1 × PN
Valve Inspection and Details:
GB/T5744 Quick-Closing Valves: In addition to hydrostatic pressure testing, the quick-closing response time and trigger self-locking must be tested; the valve must be reset only on-site and must not be remotely unlocked.
GB/T2029 Sea Suction Valves: Underwater safety valve components; coating thickness testing must be performed after hydrostatic pressure testing is passed.
GB/T589 Lift Check Valves: Test fixtures must be placed horizontally for testing; vertically installed units will not be accepted.
SDNR Globe Check Valves: Manual shut-off sealing and automatic check sealing must be accepted independently; the valve is considered passed only if both criteria are met.


