Overview
An angle stop check valve turns the flow 90° while combining isolation and non-return in one body. Types B and BS are built to GB/T 591—2026 for sea water, fresh water, lube oil and fuel oil lines. The handwheel gives positive shut-off; the disc blocks backflow automatically. The angle body suits engine-room layouts where the line must change direction at the valve.
Body selection follows the duty. HT200 grey iron is the cost-effective default for fresh water, lube oil and low-pressure general service. QT400-18 ductile iron suits critical sea water systems such as main engine cooling, where higher strength and toughness mean longer service life. PTFE seals general media; flexible graphite is mandatory for fuel oil.
Built and inspected to GB/T 591—2026. Strength and tightness follow GB/T 600—2023. Each casting keeps three heat-numbered test bars for three years. Centre-to-face (H1) and weight are controlled, with strength, tightness, assembly and marking checked on every unit.
Quick Selection Guide
Flange standard
Type B — CB/T 4196—2011, PN10/PN16, DN20–DN150. Best suited for older vessels and domestic Chinese yard builds.
Type BS — GB/T 9124.1—2019, PN6/PN10/PN16, DN20–DN300. Best suited for new-build international tonnage and mixed-source piping.
Body configuration
Angle (B/BS) — 90° flow turn; centre-to-face dimension H1. Best suited when the line changes direction at the valve and spool space is tight.
Inline (A/AS) — straight-through, no direction change. Recommended when head loss is the priority.


| TYPE | FLANGE STANDARD | PN | MAX WORKINGPRESSURE | DN (mm) | MEDIUM |
|---|---|---|---|---|---|
| B | CB/T 4196—2011 | 10 | 1.0 | 65–150 | Sea water, fresh water, lube oil, fuel oil |
| B | CB/T 4196—2011 | 16 | 1.6 | 20–50 | Sea water, fresh water, lube oil, fuel oil |
| BS | GB/T 9124.1—2019 | 6 | 0.6 | 50–300 | Sea water, fresh water, lube oil, fuel oil |
| BS | GB/T 9124.1—2019 | 10 | 1.0 | 65–250 | Sea water, fresh water, lube oil, fuel oil |
| BS | GB/T 9124.1—2019 | 16 | 1.6 | 20–50 | Sea water, fresh water, lube oil, fuel oil |
B and BS are both angle (90°) types; they differ only in flange standard.
| DN | L | H≈ | H1 | t | D | D1 | D2 | d0 | b | n | Th | D0 | S | m | WT (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 65 | 115 | 275 | 115 | 9 | 155 | 123 | 104 | 15 | 15 | 6 | M14 | 140 | 12 | 17 | 16.2 |
| 80 | 125 | 298 | 125 | 9 | 170 | 138 | 118 | 15 | 15 | 8 | M14 | 160 | 14 | 20 | 19.5 |
| 100 | 150 | 315 | 135 | 10 | 190 | 158 | 138 | 15 | 15 | 8 | M14 | 180 | 14 | 25 | 26.9 |
| 125 | 175 | 354 | 155 | 10 | 215 | 183 | 164 | 15 | 15 | 10 | M14 | 200 | 17 | 32 | 37.1 |
| 150 | 180 | 396 | 160 | 11 | 240 | 208 | 190 | 15 | 16 | 12 | M14 | 200 | 17 | 38 | 47.5 |
| DN | L | H≈ | H1 | t | D | D1 | D2 | d0 | b | n | Th | D0 | S | m | WT (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 75 | 203 | 75 | 7 | 95 | 68 | 48 | 13 | 14 | 4 | M12 | 80 | 8 | 7 | 5.0 |
| 25 | 80 | 203 | 80 | 7 | 105 | 73 | 56 | 13 | 14 | 4 | M12 | 80 | 8 | 7 | 5.3 |
| 32 | 85 | 216 | 85 | 7 | 115 | 83 | 64 | 15 | 15 | 6 | M14 | 100 | 9 | 9 | 6.7 |
| 40 | 90 | 236 | 90 | 8 | 125 | 93 | 74 | 15 | 16 | 6 | M14 | 120 | 11 | 11 | 8.3 |
| 50 | 95 | 258 | 95 | 8 | 135 | 103 | 84 | 15 | 16 | 6 | M14 | 140 | 12 | 14 | 11.2 |
Flange per CB/T 4196—2011. Weight positive deviation ≤ 4% (clause 5.8).
| DN | L | H≈ | H1 | t | D | D1 | D2 | d0 | b | n | Th | D0 | S | m | WT (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 125 | 258 | 125 | 8 | 140 | 110 | 90 | 14 | 16 | 4 | M12 | 140 | 12 | 14 | 12.1 |
| 65 | 145 | 275 | 145 | 9 | 160 | 130 | 110 | 14 | 16 | 4 | M12 | 160 | 14 | 17 | 17.2 |
| 80 | 155 | 298 | 155 | 9 | 190 | 150 | 128 | 18 | 18 | 8 | M16 | 160 | 14 | 20 | 21.3 |
| 100 | 175 | 315 | 175 | 10 | 210 | 170 | 148 | 18 | 18 | 8 | M16 | 180 | 14 | 25 | 32.0 |
| 125 | 200 | 354 | 200 | 10 | 240 | 200 | 178 | 18 | 20 | 8 | M16 | 200 | 17 | 32 | 42.4 |
| 150 | 225 | 396 | 225 | 11 | 265 | 225 | 202 | 18 | 20 | 8 | M16 | 200 | 17 | 38 | 54.9 |
| 175 | 225 | 473 | 225 | 11 | 295 | 255 | 232 | 18 | 22 | 12 | M16 | 280 | 24 | 42 | 69.4 |
| 200 | 275 | 518 | 275 | 11 | 320 | 280 | 258 | 18 | 22 | 12 | M16 | 280 | 24 | 50 | 94.2 |
| 250 | 325 | 590 | 325 | 13 | 375 | 335 | 312 | 18 | 24 | 12 | M16 | 360 | 27 | 65 | 149.0 |
| 300 | 375 | 647 | 375 | 13 | 440 | 395 | 365 | 22 | 24 | 12 | M20 | 450 | 32 | 75 | 208.0 |
Flange per GB/T 9124.1—2019. d0 follows bolt size (M12→14, M16→18, M20→22). Flange PN6 DN175–300 per standard note a — confirm bolt-hole alignment.
| DN | L | H≈ | H1 | t | D | D1 | D2 | d0 | b | n | Th | D0 | S | m | WT (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 65 | 145 | 275 | 145 | 9 | 185 | 145 | 122 | 18 | 20 | 4 | M16 | 140 | 12 | 17 | 19.6 |
| 80 | 155 | 298 | 155 | 9 | 200 | 160 | 138 | 18 | 22 | 8 | M16 | 160 | 14 | 20 | 23.5 |
| 100 | 175 | 315 | 175 | 10 | 220 | 180 | 158 | 18 | 24 | 8 | M16 | 180 | 14 | 25 | 32.5 |
| 125 | 225 | 354 | 200 | 10 | 250 | 210 | 188 | 18 | 26 | 8 | M16 | 200 | 17 | 32 | 44.2 |
| 150 | 225 | 396 | 225 | 11 | 285 | 240 | 212 | 22 | 26 | 8 | M20 | 200 | 17 | 38 | 58.9 |
| 175 | 225 | 473 | 225 | 11 | 315 | 270 | 242 | 22 | 28 | 8 | M20 | 280 | 24 | 42 | 72.9 |
| 200 | 275 | 525 | 275 | 11 | 340 | 295 | 268 | 22 | 28 | 8 | M20 | 360 | 27 | 50 | 98.2 |
| 250 | 325 | 608 | 325 | 13 | 395 | 350 | 320 | 22 | 28 | 12 | M20 | 450 | 32 | 65 | 151.0 |
Flange per GB/T 9124.1—2019. DN125 L=225 with H1=200 per manual; verify centre-to-face on the approved drawing.
| DN | L | H≈ | H1 | t | D | D1 | D2 | d0 | b | n | Th | D0 | S | m | WT (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 95 | 203 | 95 | 7 | 105 | 75 | 58 | 14 | 16 | 4 | M12 | 80 | 8 | 7 | 5.7 |
| 25 | 100 | 203 | 100 | 7 | 115 | 85 | 68 | 14 | 16 | 4 | M12 | 80 | 8 | 7 | 6.4 |
| 32 | 105 | 216 | 105 | 7 | 140 | 100 | 78 | 18 | 18 | 4 | M16 | 100 | 9 | 9 | 8.5 |
| 40 | 115 | 236 | 115 | 8 | 150 | 110 | 88 | 18 | 18 | 4 | M16 | 120 | 11 | 11 | 10.5 |
| 50 | 125 | 258 | 125 | 8 | 165 | 125 | 102 | 18 | 20 | 4 | M16 | 140 | 12 | 14 | 14.1 |
Flange per GB/T 9124.1—2019. Structure length tolerance follows GB/T 11698—2026.
| PART | MATERIAL | GRADE | STANDARD |
|---|---|---|---|
| Body / Bonnet | Grey cast iron | HT200 | GB/T 9439—2023 |
| Body / Bonnet | Ductile iron | QT400-18 | GB/T 1348—2019 |
| Disc | Cast tin bronze | ZCuSn10Zn2 | GB/T 1176—2013 |
| Stem | Aluminium bronze | QAl9—2 | GB/T 4423—2020 |
| Seat | Cast aluminium bronze | ZCuAl9Mn2 | GB/T 1176—2013 |
| Packing | PTFE braided / flexible graphite | F4SD / RSM | JB/T 6626—2011 / CB/T 3589—1994 |
| Gasket | PTFE / flexible graphite | PTFE / RSM | QB/T 4041—2010 / CB/T 3589—1994 |
| Stud | Class 6.8 | — | GB/T 898—1988 |
| Nut | Class 6 | — | GB/T 6170—2015 |
| Handwheel | Cast steel / ductile iron | ZG230-450 / QT400-15 | CB/T 3530—1993 |
Notes: For fuel oil media, packing and gasket shall be flexible graphite (clause 5.1.1). Anti-de-alloying treatment for aluminium bronze is available on request in sea water duty. Each heat keeps at least three numbered test bars, retained ≥ 3 years (clause 5.1.2).
QA & Testing
Core Performance
Strength — Per GB/T 600—2023 §4.14, tested to §5.1.1.2. Mandatory on both type and factory inspection.
Tightness — Per GB/T 600—2023 §4.15, tested to §5.1.2.2. Checked on every unit before release.
Dimensional & Geometric Control
Wall Thickness — Per GB/T 600—2023 §4.2, tolerance to §4.5.1; verified by thickness gauge, caliper or steel rule (§6.3.1).
Linear Dimensions — Tolerances per GB/T 600—2023 §4.5, measured with matching-grade gauges (§6.3.2). Type-test item only.
Face-to-Face (H1) & Structure Length (L) — Type B to the approved drawing; Type BS to GB/T 11698—2026. Verified by steel rule or vernier caliper (§6.3.3).
Geometric Tolerance — Per GB/T 600—2023 §4.7, inspected to GB/T 1958. Controlled at type-test stage (Table 5).
Weight — positive deviation ≤ 4% (§5.8); weighed on a scale of 0.01 kg resolution or finer (§6.7).
Assembly & Appearance — Per GB/T 600—2023 §4.10 and §4.11; visual or caliper check (§6.5, §6.6). Both are 100% factory items.
Material Traceability
Heat Traceability — Minimum three numbered test bars per heat, retained ≥ 3 years (§5.1.2). Chemistry and mechanical properties accepted by heat lot before production release (§7.3.2).
Body & Trim — HT200 (GB/T 9439—2023) or QT400-18 (GB/T 1348—2019); bronze disc, seat and stem per GB/T 1176—2013 and GB/T 4423—2020. All material inspected before machining (§5.1.1).
Media-Driven Selection — Fuel oil service requires flexible graphite packing and gasket (§5.1.1). Anti-de-alloying treatment for aluminium bronze available on request in sea water duty.
Inspection & Delivery
Type Test — Three samples (§7.2.3), full scope per Table 5. Any failure triggers double-quantity re-sampling; a second failure rejects the lot (§7.2.4).
Factory Test — Strength, tightness, assembly, appearance and marking on every valve; weight by agreement (§7.3.1). Chemistry and mechanical checks by heat lot, all others piece-by-piece (§7.3.2).
Marking — Per GB/T 3032 (§5.9), verified visually (§6.8).
Packing & Storage — Per GB/T 600—2023 §6.3 and §6.4 (clause 8).


