Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • A / AS Type Marine Cast Iron Flanged Check Valves — GB/T 592—2026

    Overview
    A and AS are straight-through flanged check valves to GB/T 592—2026, used on marine seawater, fresh water, lube oil and fuel oil lines. They pass flow freely in one direction and close on reverse flow, protecting pumps without manual operation. Type A follows CB/T 4196; Type AS follows GB/T 9124.1.
    Body selection follows the duty. HT200 gray iron is the cost-effective default for fresh water and lube oil; QT400-18 ductile iron suits higher shock loads, where longer service life offsets a higher initial material cost. Tin bronze trims resist wear. The aluminum-bronze seat needs de-alloying control in seawater.
    All valves are built and verified to GB/T 592—2026 against GB/T 600—2023. Strength, tightness, dimensions and assembly are checked under one controlled system. Each melt keeps at least three marked test bars for three years, giving full traceability for class and owner review.

     

     

     

     

     

     

     

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type A / AS (Basic Parameters)

    Type PN Max working pressure (MPa) DN Medium Flange standard
    A 10 1.0 65–150 Seawater / fresh water / lube oil / fuel oil CB/T 4196—2011
    A 16 1.6 20–50 Seawater / fresh water / lube oil / fuel oil CB/T 4196—2011
    AS 6 0.6 50–150 Seawater / fresh water / lube oil / fuel oil GB/T 9124.1—2019
    AS 10 1.0 65–150 Seawater / fresh water / lube oil / fuel oil GB/T 9124.1—2019
    AS 16 1.6 20–50 Seawater / fresh water / lube oil / fuel oil GB/T 9124.1—2019

    Note: When the medium is fuel oil, gasket and packing shall be flexible graphite. Dimensions in mm; pressure in MPa.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type A, PN10 (mm / kg)

    PN DN L H≈ t D D1 D2 d0 b n Th m Wt (kg)
    10 65 290 130 9 155 123 104 15 15 6 M14 19 15.1
    10 80 310 151 9 170 138 118 15 15 8 M14 23 18.3
    10 100 350 171 10 190 158 138 15 15 8 M14 28 24.8
    10 125 400 189 10 215 183 164 15 15 10 M14 35 34.7
    10 150 480 219 11 240 208 190 15 16 12 M14 42 48.4

    D = flange OD; D1 = bolt circle; D2 = sealing face dia; d0 = bolt hole dia; b = flange thickness; n = bolt count; m = disc lift. Weight is theoretical, Type A only.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type A, PN16 (mm / kg)
    PN DN L H≈ t D D1 D2 d0 b n Th m Wt (kg)
    16 20 150 87 7 95 68 48 13 14 4 M12 7 4.3
    16 25 160 89 7 105 73 56 13 14 4 M12 7 4.4
    16 32 180 93 7 115 83 64 15 15 6 M14 9 5.3
    16 40 200 105 8 125 93 74 15 16 6 M14 12 7.3
    16 50 230 117 8 135 103 84 15 16 6 M14 15 8.9

    Type A structural length tolerance per approved drawing. Weight is theoretical, Type A only.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type AS, PN6 (mm / kg)

    PN DN L H≈ t D D1 D2 d0 b n Th m Wt (kg)
    6 50 230 117 8 140 110 90 14 16 4 M12 15 9.4
    6 65 290 130 9 160 130 110 14 16 4 M12 19 15.5
    6 80 310 151 9 190 150 128 18 18 8 M16 23 19.2
    6 100 350 171 10 210 170 148 18 18 8 M16 28 28.6
    6 125 400 189 10 240 200 178 18 20 8 M16 35 38.2
    6 150 480 219 11 265 225 202 18 20 8 M16 42 52.0

    Type AS structural length tolerance per GB/T 11698—2026. Weight is theoretical, Type AS only.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type AS, PN10 (mm / kg)
    PN DN L H≈ t D D1 D2 d0 b n Th m Wt (kg)
    10 65 290 130 9 185 145 122 18 20 4ᵃ M16 19 18.1
    10 80 310 151 9 200 160 138 18 22 8 M16 23 21.6
    10 100 350 171 10 220 180 158 18 24 8 M16 28 29.2
    10 125 400 189 10 250 210 188 18 26 8 M16 35 40.2
    10 150 480 219 11 285 240 212 22 26 8 M20 42 56.4

    When using GB/T 9124.1—2019 flange connection, coordinate bolt-hole alignment (manual note a). Weight is theoretical, Type AS only.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type AS, PN16 (mm / kg)

    PN DN L H≈ t D D1 D2 d0 b n Th m Wt (kg)
    16 20 150 87 7 105 75 58 14 16 4 M12 7 4.8
    16 25 160 89 7 115 85 68 14 16 4 M12 7 5.1
    16 32 180 93 7 140 100 78 18 18 4 M16 9 7.1
    16 40 200 105 8 150 110 88 18 18 4 M16 12 9.3
    16 50 230 117 8 165 125 102 18 20 4 M16 15 11.4

    Weight is theoretical, Type AS only. Positive weight deviation shall not exceed 4% of design weight.

    Marine Cast Iron Flanged Check Valves (GB/T 592—2026) — Type A / AS (Material of Construction)

    Part Material Grade Standard
    Body, bonnet Gray iron HT200 GB/T 9439—2023
    Body, bonnet Ductile iron QT400-18 GB/T 1348—2019
    Disc, bush Cast tin bronze ZCuSn10Zn2 GB/T 1176—2013
    Seat Cast aluminum bronze ZCuAl9Mn2 GB/T 1176—2013
    Gasket PTFE PTFE QB/T 4041—2010
    Gasket Flexible graphite RSM CB/T 3589—1994
    Stud Class 6.8 6.8 GB/T 898—1988
    Nut Class 6 6 GB/T 6170—2015

    For fuel oil service, gasket and packing shall be flexible graphite. Anti-de-alloying treatment for ZCuAl9Mn2 in seawater available on request.

    QA & Testing
    Strength: GB/T 592—2026 §5.2 → GB/T 600—2023 §4.14; test per §6.1 → GB/T 600—2023 §5.1.1.3.
    Tightness: §5.3 → GB/T 600—2023 §4.15; test per §6.2 → §5.1.2.3. Both are mandatory in type and factory inspection.
    Wall thickness & tolerance: §5.4.1 → GB/T 600—2023 §4.2 and §4.5.1. Measured by gauge, caliper or steel rule per §6.3.1.
    Dimensional tolerance: §5.4.2 → GB/T 600—2023 §4.5. Type A structural length per approved drawing; Type AS per GB/T 11698—2026 (§5.4.3).
    Geometric tolerance: §5.5 → GB/T 600—2023 §4.7; inspection per GB/T 1958 (§6.4).
    Assembly / appearance / marking: §5.6/§5.7/§5.9 → GB/T 600—2023 §4.10/§4.11 and GB/T 3032; visual/caliper check per §6.5–6.8.
    Weight: §5.8 — positive deviation ≤4% of design weight; weighed on scale with division ≤0.01 kg per §6.7. Factory weight check is a negotiated item (Table 5, item 7).
    Traceability: §5.1.2 — at least 3 heat-numbered test bars per melt, retained ≥3 years.
    Inspection: type test (§7.2, 3 samples) and factory test (§7.3, unit-by-unit); re-sampling applies on failure (§7.2.4 / §7.3.3). Packaging and storage per GB/T 600—2023 §6.3 and §6.4.
    FAQ
    Q1 Is this a stop check valve?​
    No. A/AS are plain check valves to GB/T 592—2026 — no stem, no handwheel, no throttling or positive shutoff. For shutoff or regulation, use a globe/stop-check series instead.
    Q2 A or AS — how do I choose?​
    Match your mating flange: A = CB/T 4196—2011 (existing ships, domestic build); AS = GB/T 9124.1—2019 (international new-build). Both are straight-through.
    Q3 Does it affect pressure drop?​
    Straight-through bodies give a more direct flow path than angle-type B/BS. No pressure-drop figure is specified in this standard; final sizing should follow your system curve and flow rate. Not for throttling.

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top