Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • GB/T586 2026 Marine Cast Steel Flanged Check Valve Type A/AS

    Overview
    A/AS Series Marine Cast Steel Flanged Check Valves (Straight-Through Type), also called non-return valves (NRVs), are automatic check valves for ship piping systems. They allow flow in one direction and close automatically to prevent reverse flow, with no manual shut-off function. The A model uses CB/T 4196—2011 flanges; the AS model uses GB/T 9124.1—2019 PN flanges. A covers PN10 DN65–125 and PN25 DN20–100; AS covers PN16 DN65–125 and PN25 DN15–100. Suitable for fresh water, lube oil, fuel oil, air and steam up to 300°C; above 100°C, verify pressure-temperature derating per GB/T 9124.1—2019. Cast steel body and cover, 20 steel disc, 20Cr13 bushing, stainless steel overlayed seating faces, and PTFE or flexible graphite gasket as specified. Install with flow entering below the seat, in horizontal or vertical-upward lines. Each valve is pressure-tested per GB/T 600—2023. Confirm flange standard and gasket material before ordering; A and AS are not interchangeable by DN and PN alone.
    Basic Sructure Of Type A/AS Marine Cast Steel Flanged Check Valve

    Basic parameters, type A / AS (GB/T 586—2026)
    Type PN Max. working pressure (MPa) Size range (DN) Service media
    A 10 1.0 65 – 125  

     

    Fresh water, lubricating oil, fuel oil and air; steam up to 300 °C

    A 25 2.5 20 – 100
    AS 16 1.6 65 – 125
    AS 25 2.5 15 – 100
    Above 100 °C, verify the working pressure against the pressure–temperature ratings of GB/T 9124.1—2019.
    Basic dimensions, type A — CB/T 4196 flanges (GB/T 586—2026)
    PN DN L H t D D1 D2 d0 b n Thread Lift Weight (kg)
     

     

    10

    65 290 124 6 155 123 104 15 14 6 M14 19 12.5
    80 310 151 7 170 138 118 15 14 8 M14 23 15.6
    100 350 165 8 190 158 138 15 14 8 M14 28 24.5
    125 400 184 8 215 183 164 15 14 10 M14 35 31.9
     

     

     

     

     

    25

    20 150 84 6 95 68 48 13 11 4 M12 7 3.3
    25 160 84 6 105 73 56 13 12 4 M12 7 3.9
    32 180 90 6 115 83 64 15 13 6 M14 9 5.8
    40 200 99 7 125 93 74 15 13 6 M14 12 7.1
    50 230 110 7 135 103 84 15 13 6 M14 15 8.8
    65 290 128 7 170 132 110 17 15 8 M16 19 13.5
    80 310 156 7 185 147 126 17 16 8 M16 23 18.0
    100 350 168 8 205 167 146 17 16 10 M16 28 26.3
    Dimensions in mm.
    Basic dimensions, type AS — GB/T 9124.1 flanges (GB/T 586—2026)
    PN DN L H t D D1 D2 d0 b n Thread Lift Weight (kg)
     

     

    16

    65 290 130 7 185 145 122 18 18 8 M16 19 15.9
    80 310 155 7 200 160 138 18 20 8 M16 23 20.5
    100 350 168 8 220 180 158 18 20 8 M16 28 30.4
    125 400 190 8 250 210 188 18 22 8 M16 35 39.6
     

     

     

     

     

    25

    15 130 84 6 95 65 47 14 16 4 M12 7 4.2
    20 150 84 6 105 75 58 14 18 4 M12 7 4.4
    25 160 84 6 115 85 68 14 18 4 M12 7 4.9
    32 180 90 6 140 100 78 18 18 4 M16 9 8.4
    40 200 99 7 150 110 88 18 18 4 M16 12 8.9
    50 230 110 7 165 125 102 18 20 4 M16 15 10.4
    65 290 128 7 185 145 122 18 22 8 M16 19 16.6
    80 310 156 7 200 160 138 18 24 8 M16 23 22.1
    100 350 168 8 235 190 162 22 24 8 M20 28 31.5
    Dimensions in mm.
    Materials of principal parts (GB/T 586—2026)
    Part Material Grade Standard
    Body Cast steel ZG275-485 GB/T 12229—2025
    Body seating face Stainless steel, weld-deposited E347 GB/T 983—2012
    Bonnet Cast steel ZG275-485 GB/T 12229—2025
    Disc Quality carbon steel 20 GB/T 699—2015
    Disc seating face Stainless steel, weld-deposited E410 GB/T 983—2012
    Guide bushing Stainless steel 20Cr13 GB/T 1220—2007
    Gasket — water, lube oil, air PTFE PTFE QB/T 4041—2010
    Gasket — fuel oil, steam Flexible graphite RSM CB/T 3589—1994
    Stud bolt Steel 6.8 GB/T 898—1988
    Nut Steel 6 GB/T 6170—2015

    Selection And Installation— A/AS Series
    A and AS models use different flange standards: A — CB/T 4196—2011; AS — GB/T 9124.1—2019 PN series. Confirm mating flange details at inquiry.
    Installation: Horizontal or vertical-upward flow lines, with flow entering below the seat. Do not install in vertical-downward flow lines.
    Function: Automatic check valve only — no manual shut-off or isolation function.
    Specify at inquiry: Sealing face R (raised face) or F (flat face); gasket P (PTFE) or S (flexible graphite). Flexible graphite is required for fuel oil and steam service.
    Temperature: Above 100°C, verify pressure-temperature derating per GB/T 9124.1—2019.
    Pressure class: PN is not equivalent to ANSI Class. Select by flange standard and actual rating.
    Testing & Certification
    Pressure testing: Shell strength and seat tightness tested per GB/T 600—2023.
    Certification available on request: pressure test report, material certificate, dimensional inspection report, certificate of origin, and class society certification (CCS, ABS, DNV, LR, BV, NK, KR, etc.).
    Class society certification: project-based and subject to confirmation before order.

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top