Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • GB/T 2029-1980 Type B/BS Marine Cast Steel Sea Chest Valve

    Overview
    This is a flanged marine angle suction sea valve (sea chest valve): the angle flow path allows seawater to enter the onboard piping system from below the waterline, while the handwheel-operated rising stem drives the disc to open or close for positive isolation. It is specified for seawater cooling, fire-fighting and bilge service circuits in ship piping systems. One valve provides shut-off function at the hull penetration, replacing a separate pipe run plus an isolation point, so it simplifies hull penetration arrangement and saves layout space — a benefit that matters on crowded bottom and bilge zones.
    Body and bonnet are cast carbon steel as standard, supplied with anti-corrosion coating for seawater service. Cast bronze and stainless steel are optional where severe chloride corrosion or higher pressure demand better corrosion resistance and strength. The sealing pair adopts hard metal sealing, selected for wear resistance and tight shut-off under seawater medium; sealing elements follow the medium: NBR / EPDM for general seawater, PTFE for special service. Fasteners are carbon steel or stainless steel on request.
    Design, materials, testing and marking follow GB/T 2029, with strength, tightness, wall thickness and dimensional tolerances referenced to related marine piping standards. Every casting batch keeps test specimens stamped with the heat number and retained for traceability. Every single unit is pressure-tested and inspected before shipment. Full test clauses, tolerances and weights are listed in the tables below.

    Basic Sructure of GB/T 2029 Type B/BS Marine Cast steel Sea chest valve



                                                                          Basic parameters (GB/T 2029-1980)

    Type Nominal Pressure PN / MPa Nominal Diameter DN / mm Applicable Medium Operating Temperature Flange Standard Installation Method
    B 0.4 50~400 Seawater,fresh water ≤120℃ GB/T 2501 Hull bottom / bilge mounting
    BS 0.4 50~500 Seawater,fresh water ≤120℃ GB/T 2501 Hull bottom / bilge mounting

    Working Principle
    This sea chest valve is an angle-type shut-off valve with a rising stem. Rotating the handwheel drives the valve stem to move up and down, which makes the disc separate from or press tightly against the valve seat. When the disc lifts, the seawater passage is opened, and seawater outside the hull can flow into the internal piping system; when the disc is seated, the passage is closed to cut off the seawater inlet and isolate the hull from the external seawater. It only works for full open or full close isolation and is not designed for flow regulation.

                                       Basic Dimensions of Marine Cast steel Sea chest valve (GB/T 2029-1980)
    Size for Type B

    DN (mm) Structure Dimension Flange Bolt Thickness t handle D0 lift range m Weight(kg)
    L H D D1 D2 b d0 n Th.
    50 95 230 135 103 84 13 15 6 M14 7 140 16 14.4
    65 115 240 155 123 104 13 15 6 M14 7 140 20 17.6
    80 125 260 170 138 118 14 15 8 M14 7 160 24 16.8
    100 135 280 190 158 138 14 15 8 M14 8 180 30 21.8
    125 160 310 215 183 164 14 15 10 M14 8 200 40 30.8
    150 175 340 240 208 190 14 15 12 M14 9 225 48 47.8
    200 220 375 295 264 247 15 15 12 M14 9 280 60 68.4
    250 260 425 365 327 306 16 17 14 M16 10 360 70 104.0
    300 300 480 430 386 360 19 22 14 M20 11 400 78 167.0
    350 320 560 480 436 410 20 22 16 M20 11 450 100 221.0
    400 380 640 530 486 460 21 22 16 M20 12 500 110 292.0

    Size for Type BS

    DN (mm) Structure Dimension Flange Bolt Thickness t handle D0 lift range m Weight(kg)
    L H D D1 D2 b d0 n Th.
    50 125 230 140 110 90 16 14 4 M12 7 140 16 15.1
    65 145 240 160 130 110 16 14 4 M12 7 140 20 17.6
    80 155 260 190 150 128 18 18 4 M16 7 160 24 21.0
    100 175 280 210 170 148 18 18 4 M16 8 180 30 25.7
    125 200 310 240 200 178 20 18 8 M16 8 200 40 36.5
    150 225 340 265 225 202 20 18 8 M16 9 225 48 59.8
    200 275 375 320 280 258 22 18 8 M16 9 280 60 80.7
    250 325 425 375 335 312 24 18 12 M16 10 360 70 121.0
    300 375 480 440 395 365 24 22 12 M20 11 400 78 184.0
    350 425 560 490 445 415 24 22 12 M20 11 450 100 247.0
    400 475 640 540 495 465 24 22 16 M20 12 500 110 324.0
    450 500 720 595 550 520 24 22 16 M20 12 550 150 467.2
    500 525 800 645 600 570 26 22 20 M20 13 600 155 550.9

                                                                    Materials of Principle Parts(GB/T 2029-1980)

    Part Name Material
    Name Grade Standard No.
    Valve Body, Bonnet Cast Steel WCA GB/T 12229—2005
    Disc, Seat Cast Tin Bronze ZCuSn10Zn2 GB/T 1176—1987
    Valve Stem Aluminium Bronze QAl9-2 GB/T 4423—2007
    Handwheel Cast Steel WCA GB/T 12229—2005
    Packing Oil-impregnated Hemp — —
    Stud Carbon Steel 4.8 GB/T 897—1988
    Nut Carbon Steel 5 GB/T 41—2000

    Selection & Installation Key Points

    1.Selection: For seawater only, ≤120℃, PN0.4. Select B/BS type sea chest valve according to pipeline size; confirm material option for seawater corrosion resistance.
    2.Installation orientation: Shall be installed on hull bottom or bilge with vertical upward handwheel. Reserve sufficient surrounding space for operation and maintenance. FORBIDDEN: Do not use for flow regulation or throttling. 3.Sealing pair: Cast tin bronze disc and seat, suitable for seawater medium. Avoid sand, gravel and hard impurities impacting the sealing surface.
    4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected type.
    5.Flow & clearance: Unidirectional flow from outside hull to internal pipeline. Isolate upstream medium by closing the valve before disassembly; avoid seawater leakage.
    Why this Sea Chest Valve
    One integrated structure: The angle type body is the main component. Manual handwheel drives stem lifting to open/close the seawater inlet. Flange connection, compact structure, reliable sealing. It is an isolation cut-off component for seawater intake. The angle flow channel is specially designed for hull bottom installation, with smooth flow passage and low flow resistance. The bronze sealing pair features excellent seawater corrosion resistance, long service life and good tightness. The valve can be disassembled for inspection and replacement of sealing parts, without heavy dismantling of adjacent pipelines. Wetted materials: WCA cast steel body & bonnet, cast tin bronze disc and seat, aluminium bronze stem, oil-impregnated hemp packing, suitable for marine seawater suction pipeline. What it is not: a regulating valve or throttling component. It is only for seawater inlet isolation; sharp sand particles will cause rapid wear to the sealing surface.

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top