Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • B/BS Flanged Cast Iron Stop Check Valve — GB/T 591-2026

    Overview
    An angle stop check valve turns the flow 90° while combining isolation and non-return in one body. Types B and BS are built to GB/T 591—2026 for sea water, fresh water, lube oil and fuel oil lines. The handwheel gives positive shut-off; the disc blocks backflow automatically. The angle body suits engine-room layouts where the line must change direction at the valve.
    Body selection follows the duty. HT200 grey iron is the cost-effective default for fresh water, lube oil and low-pressure general service. QT400-18 ductile iron suits critical sea water systems such as main engine cooling, where higher strength and toughness mean longer service life. PTFE seals general media; flexible graphite is mandatory for fuel oil.

    Built and inspected to GB/T 591—2026. Strength and tightness follow GB/T 600—2023. Each casting keeps three heat-numbered test bars for three years. Centre-to-face (H1) and weight are controlled, with strength, tightness, assembly and marking checked on every unit.
    Quick Selection Guide
    Flange standard
    Type B — CB/T 4196—2011, PN10/PN16, DN20–DN150. Best suited for older vessels and domestic Chinese yard builds.
    Type BS — GB/T 9124.1—2019, PN6/PN10/PN16, DN20–DN300. Best suited for new-build international tonnage and mixed-source piping.
    Body configuration
    Angle (B/BS)​ — 90° flow turn; centre-to-face dimension H1. Best suited when the line changes direction at the valve and spool space is tight.
    Inline (A/AS)​ — straight-through, no direction change. Recommended when head loss is the priority.

     

     

     

     

     

     

     

    Basic Parameters — Type B / Type BS (PN, MPa, DN in mm)
    TYPE FLANGE STANDARD PN MAX WORKINGPRESSURE  DN (mm) MEDIUM
    B CB/T 4196—2011 10 1.0 65–150 Sea water, fresh water, lube oil, fuel oil
    B CB/T 4196—2011 16 1.6 20–50 Sea water, fresh water, lube oil, fuel oil
    BS GB/T 9124.1—2019 6 0.6 50–300 Sea water, fresh water, lube oil, fuel oil
    BS GB/T 9124.1—2019 10 1.0 65–250 Sea water, fresh water, lube oil, fuel oil
    BS GB/T 9124.1—2019 16 1.6 20–50 Sea water, fresh water, lube oil, fuel oil

    B and BS are both angle (90°) types; they differ only in flange standard.

     Basic Dimensions — Type B, PN10 (mm / kg)
    DN L H≈ H1 t D D1 D2 d0 b n Th D0 S m WT (kg)
    65 115 275 115 9 155 123 104 15 15 6 M14 140 12 17 16.2
    80 125 298 125 9 170 138 118 15 15 8 M14 160 14 20 19.5
    100 150 315 135 10 190 158 138 15 15 8 M14 180 14 25 26.9
    125 175 354 155 10 215 183 164 15 15 10 M14 200 17 32 37.1
    150 180 396 160 11 240 208 190 15 16 12 M14 200 17 38 47.5
     L = structure length; H ≈ = centre-to-handwheel open height; H1 = centre-to-face dimension (angle type). Flange per CB/T 4196—2011.
     Basic Dimensions — Type B, PN16 (mm / kg)
    DN L H≈ H1 t D D1 D2 d0 b n Th D0 S m WT (kg)
    20 75 203 75 7 95 68 48 13 14 4 M12 80 8 7 5.0
    25 80 203 80 7 105 73 56 13 14 4 M12 80 8 7 5.3
    32 85 216 85 7 115 83 64 15 15 6 M14 100 9 9 6.7
    40 90 236 90 8 125 93 74 15 16 6 M14 120 11 11 8.3
    50 95 258 95 8 135 103 84 15 16 6 M14 140 12 14 11.2

     Flange per CB/T 4196—2011. Weight positive deviation ≤ 4% (clause 5.8).

     Basic Dimensions — Type BS, PN6 (mm / kg)
    DN L H≈ H1 t D D1 D2 d0 b n Th D0 S m WT (kg)
    50 125 258 125 8 140 110 90 14 16 4 M12 140 12 14 12.1
    65 145 275 145 9 160 130 110 14 16 4 M12 160 14 17 17.2
    80 155 298 155 9 190 150 128 18 18 8 M16 160 14 20 21.3
    100 175 315 175 10 210 170 148 18 18 8 M16 180 14 25 32.0
    125 200 354 200 10 240 200 178 18 20 8 M16 200 17 32 42.4
    150 225 396 225 11 265 225 202 18 20 8 M16 200 17 38 54.9
    175 225 473 225 11 295 255 232 18 22 12 M16 280 24 42 69.4
    200 275 518 275 11 320 280 258 18 22 12 M16 280 24 50 94.2
    250 325 590 325 13 375 335 312 18 24 12 M16 360 27 65 149.0
    300 375 647 375 13 440 395 365 22 24 12 M20 450 32 75 208.0

    Flange per GB/T 9124.1—2019. d0 follows bolt size (M12→14, M16→18, M20→22). Flange PN6 DN175–300 per standard note a — confirm bolt-hole alignment.

    Basic Dimensions — Type BS, PN10 (mm / kg)
    DN L H≈ H1 t D D1 D2 d0 b n Th D0 S m WT (kg)
    65 145 275 145 9 185 145 122 18 20 4 M16 140 12 17 19.6
    80 155 298 155 9 200 160 138 18 22 8 M16 160 14 20 23.5
    100 175 315 175 10 220 180 158 18 24 8 M16 180 14 25 32.5
    125 225 354 200 10 250 210 188 18 26 8 M16 200 17 32 44.2
    150 225 396 225 11 285 240 212 22 26 8 M20 200 17 38 58.9
    175 225 473 225 11 315 270 242 22 28 8 M20 280 24 42 72.9
    200 275 525 275 11 340 295 268 22 28 8 M20 360 27 50 98.2
    250 325 608 325 13 395 350 320 22 28 12 M20 450 32 65 151.0

     Flange per GB/T 9124.1—2019. DN125 L=225 with H1=200 per manual; verify centre-to-face on the approved drawing.

     Basic Dimensions — Type BS, PN16 (mm / kg)
    DN L H≈ H1 t D D1 D2 d0 b n Th D0 S m WT (kg)
    20 95 203 95 7 105 75 58 14 16 4 M12 80 8 7 5.7
    25 100 203 100 7 115 85 68 14 16 4 M12 80 8 7 6.4
    32 105 216 105 7 140 100 78 18 18 4 M16 100 9 9 8.5
    40 115 236 115 8 150 110 88 18 18 4 M16 120 11 11 10.5
    50 125 258 125 8 165 125 102 18 20 4 M16 140 12 14 14.1

     Flange per GB/T 9124.1—2019. Structure length tolerance follows GB/T 11698—2026.

    Materials of Main Parts — Stop Check Valves (GB/T 591—2026)
    PART MATERIAL GRADE STANDARD
    Body / Bonnet Grey cast iron HT200 GB/T 9439—2023
    Body / Bonnet Ductile iron QT400-18 GB/T 1348—2019
    Disc Cast tin bronze ZCuSn10Zn2 GB/T 1176—2013
    Stem Aluminium bronze QAl9—2 GB/T 4423—2020
    Seat Cast aluminium bronze ZCuAl9Mn2 GB/T 1176—2013
    Packing PTFE braided / flexible graphite F4SD / RSM JB/T 6626—2011 / CB/T 3589—1994
    Gasket PTFE / flexible graphite PTFE / RSM QB/T 4041—2010 / CB/T 3589—1994
    Stud Class 6.8 — GB/T 898—1988
    Nut Class 6 — GB/T 6170—2015
    Handwheel Cast steel / ductile iron ZG230-450 / QT400-15 CB/T 3530—1993

    Notes: For fuel oil media, packing and gasket shall be flexible graphite (clause 5.1.1). Anti-de-alloying treatment for aluminium bronze is available on request in sea water duty. Each heat keeps at least three numbered test bars, retained ≥ 3 years (clause 5.1.2).

     QA & Testing
    Core Performance
    Strength — Per GB/T 600—2023 §4.14, tested to §5.1.1.2. Mandatory on both type and factory inspection.
    Tightness — Per GB/T 600—2023 §4.15, tested to §5.1.2.2. Checked on every unit before release.
    Dimensional & Geometric Control
    Wall Thickness — Per GB/T 600—2023 §4.2, tolerance to §4.5.1; verified by thickness gauge, caliper or steel rule (§6.3.1).
    Linear Dimensions — Tolerances per GB/T 600—2023 §4.5, measured with matching-grade gauges (§6.3.2). Type-test item only.
    Face-to-Face (H1) & Structure Length (L)​ — Type B to the approved drawing; Type BS to GB/T 11698—2026. Verified by steel rule or vernier caliper (§6.3.3).
    Geometric Tolerance — Per GB/T 600—2023 §4.7, inspected to GB/T 1958. Controlled at type-test stage (Table 5).
    Weight —  positive deviation ≤ 4% (§5.8); weighed on a scale of 0.01 kg resolution or finer (§6.7).
    Assembly & Appearance — Per GB/T 600—2023 §4.10 and §4.11; visual or caliper check (§6.5, §6.6). Both are 100% factory items.
    Material Traceability
    Heat Traceability — Minimum three numbered test bars per heat, retained ≥ 3 years (§5.1.2). Chemistry and mechanical properties accepted by heat lot before production release (§7.3.2).
    Body & Trim — HT200 (GB/T 9439—2023) or QT400-18 (GB/T 1348—2019); bronze disc, seat and stem per GB/T 1176—2013 and GB/T 4423—2020. All material inspected before machining (§5.1.1).
    Media-Driven Selection — Fuel oil service requires flexible graphite packing and gasket (§5.1.1). Anti-de-alloying treatment for aluminium bronze available on request in sea water duty.
    Inspection & Delivery
    Type Test — Three samples (§7.2.3), full scope per Table 5. Any failure triggers double-quantity re-sampling; a second failure rejects the lot (§7.2.4).
    Factory Test — Strength, tightness, assembly, appearance and marking on every valve; weight by agreement (§7.3.1). Chemistry and mechanical checks by heat lot, all others piece-by-piece (§7.3.2).
    Marking — Per GB/T 3032 (§5.9), verified visually (§6.8).
    Packing & Storage — Per GB/T 600—2023 §6.3 and §6.4 (clause 8).

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top