Overview
This is a flanged marine angle suction sea valve (sea chest valve): the angle flow path allows seawater to enter the onboard piping system from below the waterline, while the handwheel-operated rising stem drives the disc to open or close for positive isolation. It is specified for seawater cooling, fire-fighting and bilge service circuits in ship piping systems. One valve provides shut-off function at the hull penetration, replacing a separate pipe run plus an isolation point, so it simplifies hull penetration arrangement and saves layout space — a benefit that matters on crowded bottom and bilge zones.
Body and bonnet are cast carbon steel as standard, supplied with anti-corrosion coating for seawater service. Cast bronze and stainless steel are optional where severe chloride corrosion or higher pressure demand better corrosion resistance and strength. The sealing pair adopts hard metal sealing, selected for wear resistance and tight shut-off under seawater medium; sealing elements follow the medium: NBR / EPDM for general seawater, PTFE for special service. Fasteners are carbon steel or stainless steel on request.
Design, materials, testing and marking follow GB/T 2029, with strength, tightness, wall thickness and dimensional tolerances referenced to related marine piping standards. Every casting batch keeps test specimens stamped with the heat number and retained for traceability. Every single unit is pressure-tested and inspected before shipment. Full test clauses, tolerances and weights are listed in the tables below.
Basic Sructure of GB/T 2029 Type B/BS Marine Cast steel Sea chest valve

Basic parameters (GB/T 2029-1980)
| Type | Nominal Pressure PN / MPa | Nominal Diameter DN / mm | Applicable Medium | Operating Temperature | Flange Standard | Installation Method |
|---|---|---|---|---|---|---|
| B | 0.4 | 50~400 | Seawater,fresh water | ≤120℃ | GB/T 2501 | Hull bottom / bilge mounting |
| BS | 0.4 | 50~500 | Seawater,fresh water | ≤120℃ | GB/T 2501 | Hull bottom / bilge mounting |
Working Principle
This sea chest valve is an angle-type shut-off valve with a rising stem. Rotating the handwheel drives the valve stem to move up and down, which makes the disc separate from or press tightly against the valve seat. When the disc lifts, the seawater passage is opened, and seawater outside the hull can flow into the internal piping system; when the disc is seated, the passage is closed to cut off the seawater inlet and isolate the hull from the external seawater. It only works for full open or full close isolation and is not designed for flow regulation.
Basic Dimensions of Marine Cast steel Sea chest valve (GB/T 2029-1980)
Size for Type B
| DN (mm) | Structure Dimension | Flange | Bolt | Thickness t | handle D0 | lift range m | Weight(kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | H | D | D1 | D2 | b | d0 | n | Th. | |||||
| 50 | 95 | 230 | 135 | 103 | 84 | 13 | 15 | 6 | M14 | 7 | 140 | 16 | 14.4 |
| 65 | 115 | 240 | 155 | 123 | 104 | 13 | 15 | 6 | M14 | 7 | 140 | 20 | 17.6 |
| 80 | 125 | 260 | 170 | 138 | 118 | 14 | 15 | 8 | M14 | 7 | 160 | 24 | 16.8 |
| 100 | 135 | 280 | 190 | 158 | 138 | 14 | 15 | 8 | M14 | 8 | 180 | 30 | 21.8 |
| 125 | 160 | 310 | 215 | 183 | 164 | 14 | 15 | 10 | M14 | 8 | 200 | 40 | 30.8 |
| 150 | 175 | 340 | 240 | 208 | 190 | 14 | 15 | 12 | M14 | 9 | 225 | 48 | 47.8 |
| 200 | 220 | 375 | 295 | 264 | 247 | 15 | 15 | 12 | M14 | 9 | 280 | 60 | 68.4 |
| 250 | 260 | 425 | 365 | 327 | 306 | 16 | 17 | 14 | M16 | 10 | 360 | 70 | 104.0 |
| 300 | 300 | 480 | 430 | 386 | 360 | 19 | 22 | 14 | M20 | 11 | 400 | 78 | 167.0 |
| 350 | 320 | 560 | 480 | 436 | 410 | 20 | 22 | 16 | M20 | 11 | 450 | 100 | 221.0 |
| 400 | 380 | 640 | 530 | 486 | 460 | 21 | 22 | 16 | M20 | 12 | 500 | 110 | 292.0 |
Size for Type BS
| DN (mm) | Structure Dimension | Flange | Bolt | Thickness t | handle D0 | lift range m | Weight(kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | H | D | D1 | D2 | b | d0 | n | Th. | |||||
| 50 | 125 | 230 | 140 | 110 | 90 | 16 | 14 | 4 | M12 | 7 | 140 | 16 | 15.1 |
| 65 | 145 | 240 | 160 | 130 | 110 | 16 | 14 | 4 | M12 | 7 | 140 | 20 | 17.6 |
| 80 | 155 | 260 | 190 | 150 | 128 | 18 | 18 | 4 | M16 | 7 | 160 | 24 | 21.0 |
| 100 | 175 | 280 | 210 | 170 | 148 | 18 | 18 | 4 | M16 | 8 | 180 | 30 | 25.7 |
| 125 | 200 | 310 | 240 | 200 | 178 | 20 | 18 | 8 | M16 | 8 | 200 | 40 | 36.5 |
| 150 | 225 | 340 | 265 | 225 | 202 | 20 | 18 | 8 | M16 | 9 | 225 | 48 | 59.8 |
| 200 | 275 | 375 | 320 | 280 | 258 | 22 | 18 | 8 | M16 | 9 | 280 | 60 | 80.7 |
| 250 | 325 | 425 | 375 | 335 | 312 | 24 | 18 | 12 | M16 | 10 | 360 | 70 | 121.0 |
| 300 | 375 | 480 | 440 | 395 | 365 | 24 | 22 | 12 | M20 | 11 | 400 | 78 | 184.0 |
| 350 | 425 | 560 | 490 | 445 | 415 | 24 | 22 | 12 | M20 | 11 | 450 | 100 | 247.0 |
| 400 | 475 | 640 | 540 | 495 | 465 | 24 | 22 | 16 | M20 | 12 | 500 | 110 | 324.0 |
| 450 | 500 | 720 | 595 | 550 | 520 | 24 | 22 | 16 | M20 | 12 | 550 | 150 | 467.2 |
| 500 | 525 | 800 | 645 | 600 | 570 | 26 | 22 | 20 | M20 | 13 | 600 | 155 | 550.9 |
Materials of Principle Parts(GB/T 2029-1980)
| Part Name | Material | ||
|---|---|---|---|
| Name | Grade | Standard No. | |
| Valve Body, Bonnet | Cast Steel | WCA | GB/T 12229—2005 |
| Disc, Seat | Cast Tin Bronze | ZCuSn10Zn2 | GB/T 1176—1987 |
| Valve Stem | Aluminium Bronze | QAl9-2 | GB/T 4423—2007 |
| Handwheel | Cast Steel | WCA | GB/T 12229—2005 |
| Packing | Oil-impregnated Hemp | — | — |
| Stud | Carbon Steel | 4.8 | GB/T 897—1988 |
| Nut | Carbon Steel | 5 | GB/T 41—2000 |
Selection & Installation Key Points
1.Selection: For seawater only, ≤120℃, PN0.4. Select B/BS type sea chest valve according to pipeline size; confirm material option for seawater corrosion resistance.
2.Installation orientation: Shall be installed on hull bottom or bilge with vertical upward handwheel. Reserve sufficient surrounding space for operation and maintenance. FORBIDDEN: Do not use for flow regulation or throttling. 3.Sealing pair: Cast tin bronze disc and seat, suitable for seawater medium. Avoid sand, gravel and hard impurities impacting the sealing surface.
4.Temp-pressure: Rated pressure applies at normal temperature. Temperature rise affects sealing performance; keep operating pressure and temperature below the rated value of selected type.
5.Flow & clearance: Unidirectional flow from outside hull to internal pipeline. Isolate upstream medium by closing the valve before disassembly; avoid seawater leakage.
Why this Sea Chest Valve
One integrated structure: The angle type body is the main component. Manual handwheel drives stem lifting to open/close the seawater inlet. Flange connection, compact structure, reliable sealing. It is an isolation cut-off component for seawater intake. The angle flow channel is specially designed for hull bottom installation, with smooth flow passage and low flow resistance. The bronze sealing pair features excellent seawater corrosion resistance, long service life and good tightness. The valve can be disassembled for inspection and replacement of sealing parts, without heavy dismantling of adjacent pipelines. Wetted materials: WCA cast steel body & bonnet, cast tin bronze disc and seat, aluminium bronze stem, oil-impregnated hemp packing, suitable for marine seawater suction pipeline. What it is not: a regulating valve or throttling component. It is only for seawater inlet isolation; sharp sand particles will cause rapid wear to the sealing surface.


