Application
A straight-pattern flanged cast steel stop check valve, also called a non-return stop valve or SDNR valve. Its body is that of a globe-style stop valve fitted with a free disc: turning the handwheel isolates the line, while the disc seats itself the moment flow reverses. One valve therefore covers a duty that would otherwise require a stop valve and a check valve — no spring, no actuator, no signal. Type A is drilled to CB/T 4196 for ship piping, and type AS to GB/T 9124.1, so it bolts straight onto PN-series steel pipe flanges; both types are cast steel with metal-to-metal seating, and they handle fresh water, lubricating oil, fuel oil, air and steam up to 300 °C, or 400 °C at PN40 and PN63. They are not for sea water.
Basic Sructure of Type A/AS Flanged Cast Steel Stop Check Valve

| PN | Max. working pressure (MPa) | Type A — DN range | Type AS — DN range | Service media |
|---|---|---|---|---|
| 10 | 1.0 | 65 – 150 | 200 – 300 | Fresh water, lubricating oil, fuel oil, air and steam not exceeding 300 °C |
| 16 | 1.6 | 125 – 150 | 65 – 300 | |
| 25 | 2.5 | 20 – 150 | 15 – 200 | |
| 40 | 4.0 | 65 – 100 | 65 – 100 | Fresh water, lubricating oil, fuel oil, air and steam not exceeding 400 °C |
| 63 | 6.3 | 20 – 50 | 20 – 50 |
| PN | DN | L | H ≈ | t | D | D1 | D2 | d0 | b | n | Th. | D0 | S | Lift (m) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 65 | 290 | 308 | 6 | 155 | 123 | 104 | 15 | 14 | 6 | M14 | 140 | 12 | 17 | 15.3 |
| 80 | 310 | 339 | 7 | 170 | 138 | 118 | 15 | 14 | 8 | M14 | 160 | 14 | 20 | 20.1 | |
| 100 | 350 | 364 | 8 | 190 | 158 | 138 | 15 | 14 | 8 | M14 | 180 | 14 | 25 | 28.4 | |
| 125 | 400 | 414 | 8 | 215 | 183 | 164 | 15 | 14 | 10 | M14 | 200 | 17 | 32 | 39.8 | |
| 150 | 480 | 468 | 9 | 240 | 208 | 190 | 15 | 14 | 12 | M14 | 200 | 17 | 38 | 53.2 | |
| 16 | 125 | 400 | 453 | 8 | 225 | 187 | 168 | 17 | 15 | 10 | M16 | 250 | 22 | 32 | 53.3 |
| 150 | 480 | 505 | 9 | 255 | 217 | 196 | 17 | 15 | 12 | M16 | 280 | 24 | 38 | 65.3 | |
| 25 | 20 | 150 | 217 | 6 | 95 | 68 | 48 | 13 | 11 | 4 | M12 | 80 | 8 | 7 | 5.1 |
| 25 | 160 | 217 | 6 | 105 | 73 | 56 | 13 | 12 | 4 | M12 | 80 | 8 | 7 | 5.5 | |
| 32 | 180 | 236 | 6 | 115 | 83 | 64 | 15 | 13 | 6 | M14 | 100 | 9 | 9 | 7 | |
| 40 | 200 | 260 | 7 | 125 | 93 | 74 | 15 | 13 | 6 | M14 | 120 | 11 | 11 | 8.4 | |
| 50 | 230 | 288 | 7 | 135 | 103 | 84 | 15 | 13 | 6 | M14 | 140 | 12 | 14 | 11.7 | |
| 65 | 290 | 334 | 7 | 170 | 132 | 110 | 17 | 15 | 8 | M16 | 160 | 14 | 17 | 19.4 | |
| 80 | 310 | 362 | 7 | 185 | 147 | 126 | 17 | 16 | 8 | M16 | 200 | 17 | 20 | 25 | |
| 100 | 350 | 417 | 8 | 205 | 167 | 146 | 17 | 16 | 10 | M16 | 250 | 22 | 25 | 35.8 | |
| 125 | 400 | 481 | 9 | 240 | 196 | 172 | 21 | 19 | 10 | M20 | 280 | 24 | 32 | 62.1 | |
| 150 | 500 | 537 | 9 | 270 | 226 | 200 | 21 | 20 | 12 | M20 | 320 | 27 | 38 | 83.8 |
| PN | DN | L | H ≈ | t | D | D1 | D2 | D3 | D4 | f | d0 | b | n | Th. | D0 | S | Lift (m) | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40 | 65 | 310 | 409 | 8 | 175 | 137 | 118 | 110 | 94 | 3 | 17 | 18 | 8 | M16 | 250 | 22 | 17 | 34.6 |
| 80 | 350 | 436 | 9 | 190 | 152 | 130 | 121 | 105 | 3 | 17 | 18 | 8 | M16 | 250 | 22 | 20 | 39.6 | |
| 100 | 400 | 466 | 9 | 225 | 181 | 157 | 150 | 128 | 4 | 21 | 21 | 10 | M20 | 280 | 24 | 25 | 49.4 | |
| 63 | 20 | 160 | 261 | 7 | 105 | 73 | 58 | 51 | 35 | 3 | 13 | 13 | 6 | M12 | 100 | 9 | 7 | 7.9 |
| 25 | 180 | 272 | 7 | 115 | 83 | 66 | 58 | 42 | 3 | 15 | 15 | 6 | M14 | 100 | 9 | 7 | 8.9 | |
| 32 | 200 | 304 | 7 | 125 | 93 | 74 | 66 | 50 | 3 | 15 | 17 | 6 | M14 | 120 | 11 | 9 | 11.1 | |
| 40 | 230 | 334 | 7 | 145 | 107 | 84 | 76 | 60 | 3 | 17 | 19 | 6 | M16 | 160 | 14 | 11 | 17.4 | |
| 50 | 250 | 354 | 8 | 155 | 117 | 96 | 88 | 72 | 3 | 17 | 20 | 6 | M16 | 180 | 14 | 13 | 22.1 |
| PN | DN | L | H ≈ | t | D | D1 | D2 | d0 | b | n | Th. | D0 | S | Lift (m) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 200 | 600 | 603 | 10 | 340 | 295 | 268 | 22 | 24 | 8 | M20 | 360 | 27 | 50 | 114 |
| 250 | 730 | 706 | 11.5 | 395 | 350 | 320 | 22 | 26 | 12 | M20 | 450 | 32 | 65 | 175 | |
| 300 | 850 | 796 | 13 | 445 | 400 | 370 | 22 | 26 | 12 | M20 | 500 | 36 | 75 | 236 | |
| 16 | 65 | 290 | 335 | 7 | 185 | 145 | 122 | 18 | 18 | 8 | M16 | 160 | 14 | 17 | 22 |
| 80 | 310 | 362 | 8 | 200 | 160 | 138 | 18 | 20 | 8 | M16 | 200 | 17 | 20 | 28.8 | |
| 100 | 350 | 417 | 8 | 220 | 180 | 158 | 18 | 20 | 8 | M16 | 250 | 22 | 25 | 35.6 | |
| 125 | 400 | 453 | 8 | 250 | 210 | 188 | 18 | 22 | 8 | M16 | 250 | 22 | 32 | 52.4 | |
| 150 | 480 | 505 | 9 | 285 | 240 | 212 | 22 | 22 | 8 | M20 | 280 | 24 | 38 | 69.5 | |
| 175 | 540 | 558 | 10 | 315 | 270 | 242 | 22 | 24 | 8 | M20 | 360 | 27 | 45 | 96.8 | |
| 200 | 600 | 625 | 10 | 340 | 295 | 268 | 22 | 24 | 12 | M20 | 450 | 32 | 50 | 127 | |
| 250 | 730 | 729 | 11.5 | 405 | 355 | 320 | 26 | 26 | 12 | M24 | 500 | 36 | 65 | 189 | |
| 300 | 850 | 785 | 13 | 460 | 410 | 378 | 26 | 28 | 12 | M24 | 560 | 36 | 75 | 242 | |
| 25 | 15 | 130 | 217 | 6 | 95 | 65 | 47 | 14 | 16 | 4 | M12 | 80 | 8 | 7 | 5.2 |
| 20 | 150 | 217 | 6 | 105 | 75 | 58 | 14 | 18 | 4 | M12 | 80 | 8 | 7 | 5.6 | |
| 25 | 160 | 217 | 6 | 115 | 85 | 68 | 14 | 18 | 4 | M12 | 80 | 8 | 7 | 6.4 | |
| 32 | 180 | 236 | 6 | 140 | 100 | 78 | 18 | 18 | 4 | M16 | 100 | 9 | 9 | 9.3 | |
| 40 | 200 | 260 | 7 | 150 | 110 | 88 | 18 | 18 | 4 | M16 | 120 | 11 | 11 | 11.4 | |
| 50 | 230 | 271 | 7 | 165 | 125 | 102 | 18 | 20 | 4 | M16 | 140 | 12 | 14 | 15.2 | |
| 65 | 290 | 335 | 7 | 185 | 145 | 122 | 18 | 22 | 8 | M16 | 160 | 14 | 17 | 22.9 | |
| 80 | 310 | 362 | 8 | 200 | 160 | 138 | 18 | 24 | 8 | M16 | 200 | 17 | 20 | 30.1 | |
| 100 | 350 | 417 | 8 | 235 | 190 | 162 | 22 | 24 | 8 | M20 | 250 | 22 | 25 | 41.8 | |
| 125 | 400 | 481 | 9 | 270 | 220 | 188 | 26 | 26 | 8 | M24 | 280 | 24 | 32 | 62.9 | |
| 150 | 480 | 537 | 9 | 300 | 250 | 218 | 26 | 28 | 8 | M24 | 320 | 27 | 38 | 83.8 | |
| 200 | 600 | 680 | 11.5 | 360 | 310 | 278 | 26 | 30 | 12 | M24 | 450 | 32 | 50 | 139 |
| PN | DN | L | H ≈ | t | D | D1 | D2 | D3 | D4 | f | d0 | b | n | Th. | D0 | S | Lift (m) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40 | 65 | 290 | 409 | 8 | 185 | 145 | 122 | 110 | 94 | 3 | 18 | 22 | 8 | M16 | 250 | 22 | 17 | 37.2 |
| 80 | 310 | 436 | 9 | 200 | 160 | 138 | 121 | 105 | 3 | 18 | 24 | 8 | M16 | 250 | 22 | 20 | 39.8 | |
| 100 | 350 | 466 | 9 | 235 | 190 | 162 | 150 | 128 | 3 | 22 | 24 | 8 | M20 | 280 | 24 | 25 | 53.3 | |
| 63 | 20 | 230 | 261 | 7 | 130 | 90 | 58 | 51 | 35 | 3 | 18 | 22 | 4 | M16 | 100 | 9 | 7 | 9.6 |
| 25 | 230 | 272 | 7 | 140 | 100 | 68 | 58 | 42 | 3 | 18 | 24 | 4 | M16 | 100 | 9 | 7 | 11.4 | |
| 32 | 260 | 304 | 7 | 155 | 110 | 78 | 66 | 50 | 3 | 22 | 24 | 4 | M20 | 120 | 11 | 9 | 13.5 | |
| 40 | 260 | 334 | 7 | 170 | 125 | 88 | 76 | 60 | 3 | 22 | 26 | 4 | M20 | 160 | 14 | 11 | 21.4 | |
| 50 | 300 | 354 | 8 | 180 | 135 | 102 | 88 | 72 | 3 | 22 | 26 | 4 | M20 | 180 | 14 | 13 | 27 |
| Part | Item | Material | Grade | Standard |
|---|---|---|---|---|
| Body | Body casting | Cast steel | ZG275-485 | GB/T 12229—2025 |
| Body seating face | Stainless steel, weld-deposited | E347 | GB/T 983—2012 | |
| Bonnet | Bonnet casting | Cast steel | ZG275-485 | GB/T 12229—2025 |
| Back-seat face | Stainless steel, weld-deposited | E347 | GB/T 983—2012 | |
| Disc | Disc | Quality carbon steel | 20 | GB/T 699—2015 |
| Disc seating face | Stainless steel, weld-deposited | E410 | GB/T 983—2012 | |
| Stem | Stem | Stainless steel | 20Cr13 | GB/T 1220—2007 |
| Packing | Option A — fresh water, lube oil, air | PTFE braided packing | F4SD | JB/T 6626—2011 |
| Option B — fuel oil, steam | Flexible graphite | RSM | CB/T 3589—1994 | |
| Gasket | Option A — fresh water, lube oil, air | PTFE | PTFE | QB/T 4041—2010 |
| Option B — fuel oil, steam | Flexible graphite | RSM | CB/T 3589—1994 | |
| Fasteners | Stud bolt | Property class 6.8 | 6.8 | GB/T 898—1988 |
| Nut | Property class 6 | 6 | GB/T 6170—2015 | |
| Handwheel | Type A | Cast steel | ZG230-450 | CB/T 3530—1993 |
| Type AS | Ductile iron | QT400-15 | CB/T 3530—1993 |
Packing and gasket
Flexible graphite for fuel oil and steam — heated fuel oil attacks PTFE, and a leaking gland at the burner front is the last thing a watchkeeper needs. PTFE for fresh water, lube oil and air.
Handwheel
Cast steel for type A, ductile iron for type AS, with the open / closed indicator plane painted red.
Why this valve
Two functions in one body: the disc is the check element, the stem is the isolating element. With the handwheel run back, forward flow lifts the disc and the valve works as a check valve; wound down, the disc is held on its seat and the line is shut. One flange pair, one set of joints, one item in the spare parts list.
It closes without being told to. Reverse differential pressure puts the disc back on the seat — no spring, no air supply, no solenoid, no signal from the control system. The same event that stops the pump is what closes the valve.
The back seat is the maintenance argument. Fully open, the stem seals against the bonnet, so the gland packing can be renewed with pressure still on the line instead of draining the section.
Wetted parts are fixed at order: weld-deposited E347 body and bonnet seats, E410 disc seat, 20Cr13 stem, carbon steel disc in a cast steel body, with PTFE or flexible graphite packing and gasket to suit the medium.
What it is not: a control valve. The disc is lifted by flow or seated by the handwheel; it is not held part-open to trim flow, and it is not a pressure relief device.
Selection
DN and PN come from the pipe class, not from the valve.
PN10 – PN25 covers DN 15 – 300 depending on type, with media up to 300 °C; PN40 and PN63 reach 400 °C but only in the sizes listed (DN 20 – 100). Cast steel bodies are not for sea water.
Type is decided by the mating flange.
Type A is drilled to CB/T 4196, type AS to GB/T 9124.1. Same DN and PN do not make them interchangeable — outside diameter, bolt circle, thickness, facing and, at most sizes, bolt count all differ. Send the mating standard and facing (R = raised face, F = flat face) with the enquiry, or a flange drawing, and the pattern is confirmed before the body is cast.
Packing and gasket follow the medium rather than the pressure: S (flexible graphite) for fuel oil and steam, P (PTFE) for fresh water, lubricating oil and air.


