Product Categories

  • Marine Anodes
  • Marine Auxiliary Machinery
  • Marine Deck Machinery
  • Marine Decorative Materials
  • Marine Electric Equipment
  • Marine Flanges
  • Marine Galley And Laundry Equipment
  • Marine HVAC Systems
  • Marine Instruments
  • Marine Mooring Equipment
  • Marine Outfitting Equipment
  • Marine Pipe Fittings
  • Marine Propulsion & Shaft & Rudder System
  • Marine pump
  • Marine Safety Equipment-LSA&FFE
  • Marine Valves
  • Container
  • Dredging Equipment
  • Fishing Equipment
  • Lifting&Rigging Equipment
  • Shipbuilding Plate And Section
  • GBT584-2026 Type B/BS Flanged Stop Valve

    Application
    GB/T 584 Type B/BS flanged cast steel stop valves are the right-angle members of the same family: the body turns the flow through 90° and shuts it in one casting. Body and bonnet are ZG275-485 cast steel, the seat is a lapped metal-to-metal pair with a weld-deposited stainless facing, the stem is 20Cr13 running in a back-seated bonnet, and both ends are flanged to the Chinese national shipbuilding standards. Steam, fuel oil, lubricating oil, fresh water and compressed air are all held tight at up to 300 °C, and up to 400 °C in PN40 and PN63.
    What the angle body buys is a shorter job. Where the pipe has to turn anyway, one valve does the work of a straight valve plus an elbow: one body casting instead of two, two gasketed joints instead of four, two fewer places to leak, 4 to 18 % less weight hanging on the pipe, and a vertical stem with the handwheel where a hand can actually reach it. In an engine room that is usually the difference between a line that assembles as drawn and one that needs a spool piece made on board.
    Basic structure of Marine Cast Steel Flanged Stop Valves Type B/BS

    Type B/BS is the angle-pattern half of the GB/T 584 range. Bonnet, disc, stem, seat facing, packing, gasket, handwheel and marking are common with Type A/AS; the body casting is the only part that changes. Inlet flange on the pipe run, outlet turned 90°, handwheel on top of the bonnet: the disc travels at right angles to the inlet axis, so the seat sees the same lapped, line-contact shut-off as the straight pattern while the body absorbs the bend. Parts: 1 body, 2 disc, 3 bonnet, 4 stem, 5 gasket, 6 packing, 7 stud bolt, 8 nut, 9 handwheel.

    Basic parameters (GB/T 584—2026)
    PN Max. working
    pressure (MPa)
    Type B
    DN range
    Type BS
    DN range
    Service media
    10 1.0 65 – 150 200 – 300 Fresh water, lubricating oil, fuel oil, air and steam
    not exceeding 300 °C
    16 1.6 125 – 150 65 – 300
    25 2.5 20 – 150 15 – 200
    40 4.0 65 – 100 65 – 100 Fresh water, lubricating oil, fuel oil, air and steam
    not exceeding 400 °C
    63 6.3 20 – 50 20 – 50
    Type B, PN10 / PN16 / PN25 (GB/T 584—2026)
    PN DN L H ≈ H1 t D D1 D2 d0 b n Th. D0 S Disc lift Weight kg
    10 65 115 277 115 6 155 123 104 15 14 6 M14 140 12 19 13.9
    80 125 304 125 7 170 138 118 15 14 8 M14 160 14 26 17.9
    100 150 325 135 8 190 158 138 15 14 8 M14 180 14 35 24.2
    125 175 366 155 8 215 183 164 15 14 10 M14 200 17 44 35.4
    150 180 415 160 9 240 208 190 15 14 12 M14 200 17 57 44.0
    16 125 175 405 155 8 225 187 168 17 15 10 M16 250 22 44 47.2
    150 180 452 160 9 255 217 196 17 15 12 M16 280 24 57 61.8
    25 20 75 203 75 6 95 68 48 13 11 4 M12 80 8 7 4.9
    25 80 203 80 6 105 73 56 13 11 4 M12 80 8 7 5.5
    32 85 216 85 6 115 83 64 15 13 6 M14 100 9 9 6.5
    40 90 236 90 7 125 93 74 15 13 6 M14 120 11 11 8.7
    50 95 258 95 7 135 103 84 15 13 6 M14 140 12 14 11.0
    65 115 300 115 7 170 132 110 17 15 8 M16 160 14 18 17.7
    80 125 325 125 7 185 147 126 17 16 8 M16 200 17 24 21.9
    100 150 378 135 8 205 167 146 17 15 8 M16 250 22 35 32.9
    125 175 433 155 9 240 196 172 21 19 10 M20 280 24 44 58.4
    150 200 484 175 9 270 226 200 21 19 12 M20 320 27 57 66.4
    Type B, PN40 / PN63 (GB/T 584—2026)
    PN DN L H ≈ H1 t D D1 D2 D3 D4 f d0 b n Th. D0 S Disc lift Weight kg
    40 65 125 374 125 8 175 137 118 110 94 3 17 18 8 M16 250 22 17 32.9
    80 140 394 130 9 190 152 130 121 105 3 17 18 8 M16 250 22 20 34.8
    100 165 416 145 9 225 181 157 150 128 4 21 21 10 M20 280 24 25 44.7
    63 20 80 243 85 7 105 73 58 51 35 3 13 13 6 M12 100 9 7 7.1
    25 85 253 90 7 115 83 66 58 42 3 13 15 6 M14 100 9 7 8.3
    32 90 281 95 7 125 93 74 66 50 3 15 17 6 M14 120 11 9 10.2
    40 105 310 110 7 145 107 84 76 60 3 15 19 6 M14 160 14 11 16.4
    50 110 323 115 8 155 117 96 88 72 3 17 20 6 M16 180 14 13 20.5
    Type BS, PN10 / PN16 / PN25 (GB/T 584—2026)
    PN DN L H ≈ H1 t D D1 D2 d0 b n Th. D0 S Disc lift Weight kg
    10 200 275 543 275 10.0 340 295 268 22 24 8 M20 360 27 68 109.0
    250 325 623 325 11.5 395 350 320 22 26 12 M20 450 32 80 168.0
    300 375 695 375 13.0 445 400 370 22 26 12 M20 500 36 100 227.0
    16 65 145 300 145 7.0 185 145 122 18 18 8 M16 160 14 18 20.9
    80 155 325 155 8.0 200 160 138 18 20 8 M16 200 17 24 25.7
    100 175 378 175 8.0 220 180 158 18 20 8 M16 250 22 35 38.0
    125 200 395 200 8.0 250 210 188 18 22 8 M16 250 22 44 48.4
    150 225 452 225 9.0 285 240 212 22 22 8 M20 280 24 57 65.2
    175 225 505 225 10.0 315 270 242 22 24 8 M20 360 27 60 92.2
    200 275 565 275 10.0 340 295 268 22 24 8 M20 450 32 68 122.0
    250 325 646 325 11.5 405 355 320 26 26 12 M24 500 36 80 182.0
    300 375 760 375 13.0 460 410 378 26 28 12 M24 560 36 100 234.0
    25 15 90 203 90 6.0 95 65 45 14 16 4 M12 80 8 7 5.2
    20 95 203 95 6.0 105 75 58 14 18 4 M12 80 8 7 5.7
    25 100 203 100 6.0 115 85 68 14 18 4 M12 80 8 7 6.4
    32 105 216 105 6.0 140 100 78 14 18 4 M12 100 9 9 8.7
    40 115 236 115 6.0 150 110 88 14 18 4 M12 120 11 11 11.5
    50 125 245 125 7.0 165 125 102 18 20 4 M16 140 12 14 14.9
    65 145 300 145 7.0 185 145 122 18 22 8 M16 160 14 18 21.6
    80 155 325 155 8.0 200 160 138 18 24 8 M16 200 17 24 27.1
    100 175 378 175 8.0 235 190 162 22 24 8 M20 250 22 35 39.7
    125 200 433 200 9.0 270 220 188 26 26 8 M24 280 24 44 61.0
    150 225 484 225 9.0 300 250 218 26 28 8 M24 320 27 57 77.4
    200 275 620 275 11.5 360 310 278 26 30 12 M24 450 32 68 133.0
    Type BS, PN40 / PN63 (GB/T 584—2026)
    PN DN L H ≈ H1 t D D1 D2 D3 D4 f d0 b n Th. D0 S Disc lift Weight kg
    40 65 145 374 145 8 185 145 122 110 94 3 18 22 8 M16 250 22 17 36.4
    80 155 394 155 9 200 160 138 121 105 3 18 24 8 M16 250 22 20 40.3
    100 175 416 175 9 235 190 162 150 128 3 22 24 8 M20 280 24 25 51.5
    63 20 115 243 115 7 130 90 58 51 35 3 18 22 4 M16 100 9 7 8.5
    25 115 253 115 7 140 100 68 58 42 3 18 24 4 M16 100 9 7 10.5
    32 130 275 130 7 155 110 78 66 50 3 22 24 4 M20 120 11 9 12.8
    40 130 310 130 7 170 125 88 76 60 3 22 26 4 M20 160 14 11 20.6
    50 150 323 150 8 180 135 102 88 72 3 22 26 4 M20 180 14 13 25.8
    Materials of principal parts (GB/T 584—2026)
    Part Item Material Grade Standard
    Body Body casting Cast steel ZG275-485 GB/T 12229—2025
    Body seating face Stainless steel, weld-deposited E347 GB/T 983—2012
    Bonnet Bonnet casting Cast steel ZG275-485 GB/T 12229—2025
    Back-seat face Stainless steel, weld-deposited E347 GB/T 983—2012
    Disc Disc Quality carbon steel 20 GB/T 699—2015
    Disc seating face Stainless steel, weld-deposited E410 GB/T 983—2012
    Stem Stem Stainless steel 20Cr13 GB/T 1220—2007
    Packing Option 1 PTFE braided packing F4SD JB/T 6626—2011
    Option 2 Flexible graphite RSM CB/T 3589—1994
    Gasket Option 1 PTFE PTFE QB/T 4041—2010
    Option 2 Flexible graphite RSM CB/T 3589—1994
    Fasteners Stud bolt Property class 6.8 Property class 6.8 GB/T 898—1988
    Nut Property class 6 Property class 6 GB/T 6170—2015
    Handwheel Option 1 Cast steel ZG230-450 CB/T 3530—1993
    Option 2 Ductile iron QT400-15 CB/T 3530—1993

    When the line carries fuel oil or steam, flexible graphite shall be used for both packing and gasket. A cast steel handwheel is usual for type B; a ductile iron handwheel for type BS.

    PN25, DN50 — the same size in all four types (GB/T 584—2026)
    Type Flange standard L H ≈ D D1 D2 d0 b n Th. Weight kg
    A CB/T 4196—2011 230 288 135 103 84 15 13 6 M14 11.8
    AS GB/T 9124.1—2019 230 275 165 125 102 18 20 4 M16 15.2
    B CB/T 4196—2011 95 258 135 103 84 15 14 6 M14 11.0
    BS GB/T 9124.1—2019 125 245 165 125 102 18 20 4 M16 14.9

    FAQ — what buyers ask before the first order

    Type B or type BS — which one do I need?
    Match the flange on the pipe: CB/T 4196 for type B, GB/T 9124.1 for type BS. Same DN and same PN do not mean the same bolt circle.
    What sizes and classes can you supply?
    DN15 to DN300, PN10 to PN63. Not every size is made in every class — the DN range column in the basic parameters table is the limit.

    Why this valve
    Built to the standard,  ZG275-485 cast steel body and bonnet, a lapped metal-to-metal seat with stainless weld-deposited facing, precision-machined disc and 20Cr13 stem — the materials GB/T 584—2026 calls up, in the grades it calls up.
    That is what holds tight in steam, fuel oil, lubricating oil, fresh water and compressed air: shut-off up to 300 °C, and to 400 °C in PN40 and PN63, with smooth handwheel operation throughout.
    The angle body is the reason to choose this pattern. The turn and the isolation are one casting, so the elbow and its two joints come out of the line, the weight on the pipe drops, and the stem stays vertical with the handwheel where it can be worked.
    Two flange patterns, one range. CB/T 4196—2011 for type B, GB/T 9124.1—2019 for type BS — DN15 to DN300, PN10 to PN63, from the same design.
    Tell us the pipe standard, the size, the medium and the temperature — the designation follows from there.

    Related Products

    GB Marine Valve

    GB Marine Valves are suitable for common marine media such as fresh water, seawater, fuel oil, lubricating oil, air, and steam. They are primarily used for media shutoff, flow direction control, pressure regulation, and flow control in marine piping systems, and are certified by CCS, ABS, LR, DNV, and others.‌‌

    Send Inquiry

    If you have any questions about our products or services, feel free to reach out to customer service team.

    Scroll to Top